TE Connectivity CHAMP System 5 Series D-sub Connector Backshell, 50 Way, Strain Relief

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Strain Relief for CHAMP IDC Connectors

Strain Relief and Cover Kits for CHAMP IDC connectors:
The System 5 Series 50 position Strain Relief Cover kits, 739-0931 and 739-0940 have a 120° cable exit Ø 8.9-17.3 mm Black and Almond in colour respectively.

The 14 position Strain Relief Cover kits, 823-6816 has a 90° cable exit Ø 4.7-5.84 mm and 823-6819 has a 180° cable exit Ø 6.73-7.87 mm.

The 24 position Strain Relief Cover kit, 823-6825 has a 90° cable exit Ø 6.35-7.62 mm.

The 50 position Strain Relief Cover kits:
719-4452 has 90° cable exit Ø 10.8-12.7 mm.
823-6828 has 90° cable exit Ø 12.07-13.7 mm.
823-6800 has a 180° cable exit Ø 9.65-10.92 mm.
823-6897 is a 0.8mm Champ Squeeze to Release Backshell, 180° cable exit Ø 8.0-8.76mm.

The 64 position Strain Relief Cover kits:
823-6812 has 90° cable exit Ø 13.7-15.36 mm.
823-6796 has 90° cable exit Ø 12.07-13.7 mm.

The 50 position Strain Relief and Covers only:
823-6787 Strain Relief, snap-on, two required.
823-6799 Cover, 90° cable exit, clamp required.
823-6831 Cover, with Captive 4-40 UNC screw, 90° cable exit Ø 8.89-10.8 mm.
823-6822 Cover, 90° cable exit, ratchet style clamp required.

Cable Clamps for Covers:
823-6783 Locking Latch style for cable Ø 10.8-12.7 mm.
823-6793 Locking Latch style for cable Ø 8.9-10.8 mm.

Champ connectors

Specificaties
Kenmerk Waarde
Number of Contacts 50
D-Sub Shell Size D
Body Orientation Straight
Colour Black, Brown
Strain Relief Yes
Series CHAMP System 5
67 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
5,90
(excl. BTW)
7,14
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 5,90
10 - 24
€ 5,02
25 - 49
€ 4,42
50 - 74
€ 3,83
75 +
€ 3,71
Verpakkingsopties
Related Products
Our range of diecast, zinc D-Sub connector housings ...
Description:
Our range of diecast, zinc D-Sub connector housings from Phoenix Contacts feature a range of straight and angled connectors. Customer can make use of the IP20 hoods that have a spacious inner interior - this also makes them suitable for ...
These FMK Series Metal Hood Backshells have a ...
Description:
These FMK Series Metal Hood Backshells have a Large Inner Chamber and an Angled or Straight Cable Outlet. This large amount of internal space is particularly suitable for D-sub connectors with special contacts. The design of the FMK Series Metal ...
This range of the 103 Series .050" Mini ...
Description:
This range of the 103 Series .050" Mini Delta Ribbon (MDR) Connectors Plastic Solder Plug Junction Shell - Non Shielded Backshells are available with Screw or Quick Release Latching Mechanism. The design of the 103 Series MDR Junction Shell features ...
Unshielded cable backshells or cable clamps for use ...
Description:
Unshielded cable backshells or cable clamps for use with AMPLIMITE d-sub connectors. These backshells consist of 2 black plastic (ABS) shell halves (apart from stock number 717-4599 which has a nickel over copper plating) with a straight cable exit.Stock numbers ...