TE Connectivity 1991253 Series PA D-sub Connector Backshell, 15 Way

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DK
Productomschrijving

TE Connectivity Plastic Backshell for D-Subminiature Connector

Thermoplastic backshell for use with D-subminiature connectors. These backshells have a clam type shell with a 180° cable exit angle and accept a cable insulation diameter range of 3.00 to 11mm. Each d-subminiature backshell consists of the following components:
2 x polyamide jack screw knobs
2 x zinc plated carbon steel jackscrews with a 4-40 thread size
1 x polyamide cable clamp base
1 x zinc plated carbon steel cable clamp
2 x zinc plated carbon steel fixing screws
1 x polyamide backshell body

TE Connectivity AMPLIMITE D-Subminiature Connectors

Specificaties
Kenmerk Waarde
Number of Contacts 15
Housing Material PA
D-Sub Shell Size A
Body Orientation Straight
Colour Black
Series 1991253
86 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
925 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
1,91
(excl. BTW)
2,31
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
€ 1,91
25 - 49
€ 1,70
50 - 99
€ 1,55
100 +
€ 1,48
Verpakkingsopties
Related Products
High quality diecast backshells with dual cable entryIdeal ...
Description:
High quality diecast backshells with dual cable entryIdeal for 'daisy-chaining' connection within -eg.- industrial BUS systems applicationsProvided with a blanking plate to maintain screening integrity at the end of a cable runAvailable in 9,15, 25, 37-wayFor cable diameters of 4.8 ...
AMPLIMITE straight exit two-piece RFI/EMI shielded backshell kits ...
Description:
AMPLIMITE straight exit two-piece RFI/EMI shielded backshell kits or cable clamps with die cast or metal plated plastic shields for use with HDE Metal-Shell and HDP Metal-Shell (tin plated only) d-sub cable mount connectors. These AMPLIMITE straight exit two-piece RFI/EMI ...
AMPLIMITE RFI/EMI shielded die cast 90° exit, two-piece ...
Description:
AMPLIMITE RFI/EMI shielded die cast 90° exit, two-piece backshell or cable clamp kits for use with HDE Metal-Shell and HDP Metal-Shell (tin plated only) d-sub cable connectors with a variety of cable diameter sizes (please see table for details). These ...
AMPLIMITE unassembled hinged box and lid unshielded cable ...
Description:
AMPLIMITE unassembled hinged box and lid unshielded cable clamps or backshell kits with a 180 and 90° exit. These AMPLIMITE box and lid unshielded backshells have black thermoplastic housings with a textured finish, black thermoplastic gates, black zinc plated steel ...