MH Connectors MHDTZK Series Zinc D-sub Connector Hood, 25 Way, Strain Relief

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

MH Connectors Zinc Nickel Plated Hoods, MHDTZK Series

A range of Zinc, Nickel Plated Hoods from MH Connectors. These metal Backshells have a C-Clip for grounding the cable braid or drain wire and are re-openable. A multi diameter ABS grommet Strain Relief provides a secure termination to the Hood for cables up to 9 mm Outside Diameter. Full metal UNC 4-40 threaded Jackscrews are supplied with these Backshells.

Hood Screws are M3, Zinc plated steel
Compression Spring is Nickel plated steel
Operating Temperature Range -40 °C to +120 °C

Specificaties
Kenmerk Waarde
Number of Contacts 25
Housing Material Zinc
D-Sub Shell Size B
Body Orientation Straight
Colour Silver
Strain Relief Yes
Series MHDTZK
66 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
595 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
3,84
(excl. BTW)
4,65
(incl. BTW)
Aantal stuks
Per stuk
1 - 49
€ 3,84
50 - 99
€ 3,65
100 - 249
€ 3,46
250 - 499
€ 3,26
500 +
€ 3,08
Related Products
High quality diecast backshells with dual cable entryIdeal ...
Description:
High quality diecast backshells with dual cable entryIdeal for 'daisy-chaining' connection within -eg.- industrial BUS systems applicationsProvided with a blanking plate to maintain screening integrity at the end of a cable runAvailable in 9,15, 25, 37-wayFor cable diameters of 4.8 ...
These metal hoods provide a shielded connection with ...
Description:
These metal hoods provide a shielded connection with electrical continuity between the chassis earth and the cable braid.The locking screws are 4-40 thread.
2 piece diecast zinc backshells with plastic strain ...
Description:
2 piece diecast zinc backshells with plastic strain relief inserts and earth connectionNickel plate finish. Meets VDE0781 and FCC207 shielding regsAttenuation; >40dB (30MHz to 1GHz)Accepts 3.5mm to 13mm cable.
The MHDM range of Die-Cast Zinc Hoods from ...
Description:
The MHDM range of Die-Cast Zinc Hoods from the MH MHulti Hood series feature a two piece zinc body with two body retaining screws. The MHulti series hood systems are designed with the assembler in mind, the internal cable retainer ...