MH Connectors MHDTZK Series Zinc D-sub Connector Backshell, 15 Way, Strain Relief

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

MH Connectors Zinc Nickel Plated Hoods, MHDTZK Series

A range of Zinc, Nickel Plated Hoods from MH Connectors. These metal Backshells have a C-Clip for grounding the cable braid or drain wire and are re-openable. A multi diameter ABS grommet Strain Relief provides a secure termination to the Hood for cables up to 9 mm Outside Diameter. Full metal UNC 4-40 threaded Jackscrews are supplied with these Backshells.

Hood Screws are M3, Zinc plated steel
Compression Spring is Nickel plated steel
Operating Temperature Range -40 °C to +120 °C

Specificaties
Kenmerk Waarde
Number of Contacts 15
Housing Material Zinc
D-Sub Shell Size A
Body Orientation Straight
Colour Silver
Strain Relief Yes
Series MHDTZK
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 08-01-2020, met een levertijd van 1 werkdag.
Prijs Each
3,71
(excl. BTW)
4,49
(incl. BTW)
Aantal stuks
Per stuk
1 - 49
€ 3,71
50 - 99
€ 3,52
100 - 249
€ 3,31
250 - 499
€ 3,13
500 +
€ 2,94
Related Products
Thanks to strain relief, both individual wire bundles ...
Description:
Thanks to strain relief, both individual wire bundles and cables of different diameters can be fastened safely. It can be screwed quikly and easily onto the respective Toughcon connector or receptacle. Material PPO with GFTemperature range -55°C to +105°C.
High quality diecast backshells with dual cable entryIdeal ...
Description:
High quality diecast backshells with dual cable entryIdeal for 'daisy-chaining' connection within -eg.- industrial BUS systems applicationsProvided with a blanking plate to maintain screening integrity at the end of a cable runAvailable in 9,15, 25, 37-wayFor cable diameters of 4.8 ...
These metal hoods provide a shielded connection with ...
Description:
These metal hoods provide a shielded connection with electrical continuity between the chassis earth and the cable braid.The locking screws are 4-40 thread.
Nickel plated die-cast zinc ADK backshells come as ...
Description:
Nickel plated die-cast zinc ADK backshells come as a complete kit comprising Shells, jackscrews and cable grommets to suit 4, 5, 7 and 9mm cable diameters.These backshells have self tapping T10 screws, a suitable driver would be 736-181.