MH Connectors MHDCMR Series Zinc Right Angle D-sub Connector Hood, 25 Way, Strain Relief

  • RS-stocknr. 821-2765
  • Fabrikantnummer MHDCMR25-ULP
  • Fabrikant MH Connectors
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

MH Connectors Metal D-Connector hoods, MHDCMR Series, 90 Degrees

MH Connectors low profile D-connector hoods, MHDDCMR series, this range of D-connector hoods are of Die Cast Zinc construction and offer cable 90 degree entry are re-openeable and offer excellent EMI connector protection with Nickel plating, full metal Jackscrews with 4-40 UNC threading and various sizes of plastic grommets.

Zinc, Nickel plated Backshell halves
Right Angle Cable entry for diameters from 4 to 16.5 mm depending on Series and size
UNC 4-40 Jackscrews
Plastic Grommets

Stock Number Features:

720-3035 9 way K Series, 2 piece ABS compression insert grommet for diameters 4 - 9 mm, Operating temperature -40 to +120 ° C
720-3039 25 way K Series, 2 piece ABS compression insert grommet for diameters 4 - 9 mm, Operating temperature -40 to +120 ° C
821-2753 9 way ULP Series, 1 piece Thermoplastic compression insert grommet for diameters 5.3 - 8.1 mm, Operating temperature -25 to +90 ° C
821-2762 15 way ULP Series, 1 piece Thermoplastic compression insert grommet for diameters 5.3 - 8.1 mm, Operating temperature -25 to +90 ° C
821-2765 25 way ULP Series, Supplied with a metal clamp for diameters 5.8 - 11.4 mm, Operating temperature -25 to +90 ° C
821-2769 37 way ULP Series, 1 piece Thermoplastic compression insert grommet for diameters 8.9 - 16.5 mm, Operating temperature -25 to +90 ° C

Specificaties
Kenmerk Waarde
Number of Contacts 25
D-Sub Shell Size B
Housing Material Zinc
Body Orientation Right Angle
Colour Silver
Strain Relief Yes
Series MHDCMR
116 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
508 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
10,91
(excl. BTW)
13,20
(incl. BTW)
Aantal stuks
Per stuk
1 - 49
€ 10,91
50 - 99
€ 9,56
100 - 249
€ 8,18
250 - 499
€ 7,37
500 +
€ 6,55
Related Products
Suitable for use in conjunction with D-sub standard, ...
Description:
Suitable for use in conjunction with D-sub standard, mixed layout and high density plug connectors.IP 67 protection level in accordance with DIN 40050Low-profile designCable diameter 6 → 8 mmFWA version for rear-mounted mating plugFWAF version for front-mounted mating plugSnap-fit strain ...
AMPLIMITE straight exit two-piece RFI/EMI shielded backshell kits ...
Description:
AMPLIMITE straight exit two-piece RFI/EMI shielded backshell kits or cable clamps with die cast or metal plated plastic shields for use with HDE Metal-Shell and HDP Metal-Shell (tin plated only) d-sub cable mount connectors. These AMPLIMITE straight exit two-piece RFI/EMI ...
Nickel plated die-cast zinc ADK backshells come as ...
Description:
Nickel plated die-cast zinc ADK backshells come as a complete kit comprising Shells, jackscrews and cable grommets to suit 4, 5, 7 and 9mm cable diameters.These backshells have self tapping T10 screws, a suitable driver would be 736-181.
AMPLIMITE .050 series III shielded SCSI (50 and ...
Description:
AMPLIMITE .050 series III shielded SCSI (50 and 68 way) d-sub backshell kits consisting of and upper and lower backshell made from from zinc with nickel over copper plating, 2 x stainless steel spring latches, stainless steel 2-56 screws and ...