Harting D-sub Series Female Crimp D-sub Connector Contact Pin, 18 → 22 AWG

  • RS-stocknr. 141-0370
  • Fabrikantnummer 09670003676
  • Fabrikant HARTING
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CH
Productomschrijving

D-Sub turned crimp contacts

A range of Harting D-sub turned crimp contacts for use within applicable Harting D-sub connectors that require a hard wearing and durable contact machined to exacting tolerances.

Turned contacts
With round bushing
Performance level 1

Specificaties
Kenmerk Waarde
Gender Female
Contact Material Copper Alloy
Wire Size 18 → 22 AWG
Minimum Wire Size mm² 0.33mm²
Maximum Wire Size mm² 0.82mm²
Contact Type Pin
Series D-Sub
Minimum Wire Size AWG 22AWG
Maximum Wire Size AWG 18AWG
Termination Method Crimp
Length 13.65mm
406 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
2,57
(excl. BTW)
3,11
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
€ 2,57
25 - 49
€ 2,24
50 +
€ 2,13
Related Products
A range of density and a half pin ...
Description:
A range of density and a half pin and socket crimp and solder contacts for use with high density D plug and socket connector housings (see stock numbers 481-459 and 481-465 typcially). The recommended wire size for the 1.5 density ...
Gold over nickel plated pin and socket contacts. ...
Description:
Gold over nickel plated pin and socket contacts. Stock numbers 446-771 and 446-793 will accept wire sizes 28 to 24 awg (0·08-0·20mm²) eg. 10/0·1 wireStock numbers 446-787 and 446-800 will accept wire sizes 24 to 20 awg (0·20 to 0·52mm2) ...
A range of Size 20 DM signal pin ...
Description:
A range of Size 20 DM signal pin and socket contacts for use with AMPLIMITE series 109 MIL-C-24308 and MIL-C-39029 d-sub connectors. These series AMPLIMITE series 109 contacts are screw-machined with a copper alloy body material with gold plating on ...
AMPLIMITE size 20 DF snap-in solder cup contacts ...
Description:
AMPLIMITE size 20 DF snap-in solder cup contacts for use with AMPLIMITE HDP-20 series crimp snap in contact d-sub connectors. These size 20 DF snap-in solder cup contacts have a 0.00076 gold plating, a 1.02mm pin diameter and accept a ...