TE Connectivity AMPLIMITE HDP-22 Series size 22 Female Crimp D-sub Connector Contact, Gold over Nickel Plated Signal

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

AMPLIMITE Size 22 DF Crimp Snap-In Contacts for HDP-22 D-Sub Connectors

AMPLIMITE size 22 DF crimp snap-in contacts for HDP-22 d-sub connectors. These 22 DF crimp snap-in contacts are precision formed and accept a wire size range of 28-22 AWG (0.4 to 0.08mm2). The pin crimp contacts are made from brass and the socket contacts are made from phosphor bronze. The platings for these contacts are as follows:
Stock numbers 680-9692, 270-9838, 718-1207 and 314-8010 are duplex plated with 0.00076 gold
Stock numbers 798-1322 , 270-9850 and 314-8026 are duplex plated gold flash
For PRO-CRIMPER II hand tool see stock number 314-8032
For insertion/extraction tool see stock number 446-822

Male and female crimp contacts.
Will accept wire sizes 28 to 22 a.w.g. (0.08-0.4mm2).
Use crimp tool stock no. 314-8032 and insert/extraction tool stock no. 446-822.

Approvals

UL Listed; CSA Certified

Standards

MIL-C-24308

TE Connectivity AMPLIMITE D-Subminiature Connectors

Specificaties
Kenmerk Waarde
Gender Female
Contact Material Phosphor Bronze
Contact Plating Gold over Nickel
Wire Size 28 → 22 AWG
Contact Type Signal
Series AMPLIMITE HDP-22
Contact Size 22
Termination Method Crimp
1250 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
8060 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
0,334
(excl. BTW)
0,404
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 240
€ 0,334
€ 3,34
250 - 740
€ 0,195
€ 1,95
750 - 1990
€ 0,185
€ 1,85
2000 - 3990
€ 0,158
€ 1,58
4000 +
€ 0,14
€ 1,40
*prijsindicatie
Verpakkingsopties
Related Products
TE Connectivity's range of crimp d-sub connectors boast ...
Description:
TE Connectivity's range of crimp d-sub connectors boast tin plated steels shells with a 94V0- black thermoplastic inserts. These AMPLIMITE are high density crimp connectors, approximately 65% higher density then HD-20 connectors. These connectors will mate with any size 22 ...
These Shielded D-Sub Right Angle Adaptors convert Pins ...
Description:
These Shielded D-Sub Right Angle Adaptors convert Pins to Sockets . The design of these Shielded D-Sub Right Angle Adaptors features brass nickel plated 4-40UNC mounting screws on the pin connector face and steel tin plated female 4-40UNC screw locks ...
These unshielded D-Sub Hoods from FCT are for ...
Description:
These unshielded D-Sub Hoods from FCT are for shell sizes 1 to 4. With a 50° angled cable entry these D-Sub Hoods present a low profile. The Locking Screws are nickel plated brass with a 4-40UNC thread for these D-Sub ...
AMPLIMITE HDF-20 series low profile metal shell IDC ...
Description:
AMPLIMITE HDF-20 series low profile metal shell IDC d-sub connectors for flat ribbon cable. These AMPLIMITE HDF-20 series IDC d-sub ribbon cable connectors have pre-assembled black 94V-0 rated thermoplastic housings and covers with a tin plated steel front shell and ...