Provertha, TMC 9 Way Right Angle Through Hole D-sub Connector Socket, 2.84mm Pitch, with 4-40 UNC inserts, Guide Frame

  • RS-stocknr. 173-7766
  • Fabrikantnummer 003601
  • Fabrikant Provertha
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Dip-soldered connection, angled at 90°, with guide frame, riveting nut

Sub-D connector Erni

Laminated ground contact on the male housings for optimal screening
Solid contacts on the male connectors with tinned manual soldering termination

Series TMC connectors are available in various housing sizes and with different numbers of pin.

Specificaties
Kenmerk Waarde
Number of Contacts 9
Gender Female
Body Orientation Right Angle
Mounting Type Through Hole
Pitch 2.84mm
Termination Method Solder
Mounting Hardware Guide Frame, 4-40 UNC inserts
Current Rating 5.0A
Housing Material PBT
Voltage Rating 1.0 kV
Length 30.8mm
Width 11.0mm
Depth 12.5mm
Dimensions 30.8 x 11 x 12.5mm
Series Number 003
Contact Plating Gold
Maximum Operating Temperature +125°C
Series TMC
Minimum Operating Temperature -65.0°C
75 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Tray of 25)
6,027
(excl. BTW)
7,293
(incl. BTW)
Aantal stuks
Per stuk
Per tray*
25 +
€ 6,027
€ 150,675
*prijsindicatie
Related Products
From Harting, a range of solder D-Sub miniature ...
Description:
From Harting, a range of solder D-Sub miniature connectors with stamped and angled male contacts. The U.S footprint plugs have copper alloy contacts in a robust metal shell with extra grounding pin. Secured in the panel with a fixing flange ...
From Harting, a range of 9 way solder ...
Description:
From Harting, a range of 9 way solder D-sub miniature connectors with straight stamped female contacts. The DIN 41652 sockets have copper alloy contacts housed in a robust metal shell. Secured in the panel with a fixing flange and 4 ...
Straight D-sub connectors for printed circuits.Mounting system using ...
Description:
Straight D-sub connectors for printed circuits.Mounting system using cylindrical harpoons with threaded spacers, also used as earthing point for cards of 1.6 → 3.2 mm thickness.Better hold on the printed circuit; can be used with cards of varying thicknesses (harpoon ...
WR-DSUB series IDC cable mounting D-sub plug and ...
Description:
WR-DSUB series IDC cable mounting D-sub plug and socket connectors with 4-40 UNC screw locks. These IDC d-sub plug and socket connectors have a blue UL94-V0 PBT insulator with a steel tin plated shell. The contacts for these WR-DSUB series ...