RS PRO 9 Way Panel Mount D-sub Connector Plug, 2.77mm Pitch

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

RS PRO D-Sub Connector with Solder Cups and Stamped and Formed Contacts

From RS PRO a durable D-Subminiature connector with a robust steel shell, stamped and formed contacts and solder cup terminations for the easy connection of wires. These D-sub connectors are ideal for use for making I/O (input/output) interconnections in a wide range of industrial and commercial applications

What is a D-Sub Connector?

A D-Sub connector is a popular type of I/O (input/output) connects that is commonly used in the computer and datacoms industry to provide power and point-to-point communications between two devices such as a computer and a monitor. The d-sub contains two or more parallel rows of pins or sockets surrounded by a D-shaped metal shell which provides mechanical support and ensures the correct orientation is used when mating. These d-subs are available as female D-sub sockets (or d-sub receptacles) with female contacts or male D-sub plugs with male pin contacts. The socket style female connector mates with the plug style male connector. Please note that a D-sub with a plastic shell cannot be mated with a D-sub with a metal shell.

Features and Benefits

• Robust design
• Durable tin plated steel shell
• Dimples on the shell (plugs only) for improved electrical conductivity and grounding
• Good EMI/RFI protection
• Gold plated stamped and formed contacts
• Flanges with for mounting holes for screw mounting to a panel
• Tinned solder cup terminations for simple wire connection

Applications

This d-sub connector with its robust design and high reliability can be used in communications and network ports in a wide range of industrial and commercial applications. Applications include the following:

• Computers, monitors and scanners
• Networking and communications equipment
• Data processing equipment
• Industrial equipment
• Test and measurement instrumentation
• Remote sensors and data loggers
• Portable electric generation equipment

How do you mount these connectors?

These d-subs are designed to be panel mounted. A hole is cut in the panel which is determined by the panel cut-out dimensions of the plug or socket. Two mounting flanges either side of the connector incorporate mounting holes. Holes are drilled into the panel to align with these mounting holes. The connector is then inserted into the panel cut-out and secured in place by inserting screws through the holes in both the connector and panel.

How do you terminate the wires into the connector?

These d-subs feature solder cups which are hollow cup-like cavities into which the wire is inserted and secured by soldering. Firstly make sure the connector is held securely while working on it. Strip the ends of each wire using the depth of solder cups to gauge how much insulation you need to remove. Tin the exposed wire strands with a soldering iron and partially fill the solder cup with solder. Apply a soldering iron to the edge of the cup allowing the solder to melt. Insert the end of the tinned wire into the cup and hold it in place until the solder becomes solid. If the wire gauge is large enough to support itself in the cup place it in the cup and feed in the solder whilst applying the soldering iron to the back of the cup.

Standards

D

Specificaties
Kenmerk Waarde
Number of Contacts 9
Gender Male
Body Orientation Straight
Mounting Type Panel Mount
Pitch 2.77mm
D Connector Type Standard D-Sub
D-Sub Shell Size E
Termination Method Solder
Current Rating 5.0A
Housing Material Steel
Voltage Rating 500.0 V
Length 30.81mm
Width 10.72mm
Depth 12.55mm
Dimensions 30.81 x 10.72 x 12.55mm
Minimum Operating Temperature -55.0°C
Contact Material Phosphor Bronze
Contact Plating Gold
Maximum Operating Temperature +105°C
14910 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Pack of 5)
0,768
(excl. BTW)
0,929
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 120
€ 0,768
€ 3,84
125 - 370
€ 0,704
€ 3,52
375 - 995
€ 0,628
€ 3,14
1000 - 1995
€ 0,486
€ 2,43
2000 +
€ 0,444
€ 2,22
*prijsindicatie
Related Products
A D-sub connector is a common type of ...
Description:
A D-sub connector is a common type of electrical devise named by their D shaped metal shield feature. When they were introduced, D-subs were among the smallest connectors used on computer systems.AMPLIMITE HD-20 Solder Cup d-sub cable mount d-sub connectors ...
TMC Series trapezoidal D-sub plug and socket connectors ...
Description:
TMC Series trapezoidal D-sub plug and socket connectors with either gold plated or tin plated solder cup terminations and tinned steel housings. These TMC d-subminiature connectors have an indirect mating system and punched grooves on the metal protective collar of ...
D-Sub Mixed Contact Connectors in 12 industry standard ...
Description:
D-Sub Mixed Contact Connectors in 12 industry standard contact arrangements:3W3 | 3W3K | 5W1 | 5W5 | 7W2 | 8W8 | 9W4 | 11W1 | 13W3 | 13W6 | 17W2 | 21W1 | 21WA4Available with 20 or 40 amp power ...
Available in 12 industry standard sizes / positions:3W3 ...
Description:
Available in 12 industry standard sizes / positions:3W3 | 5W1 | 5W5 | 7W2 | 9W4 | 11W1 | 13W3 | 13W6 | 17W2 | 21W1 | 21WA4 Available with 20 or 40 amp power contacts, 5 amp signal. Allows ...