- RS-stocknr.:
- 787-3791
- Fabrikantnummer:
- MHD45PK25-DB25P-K
- Fabrikant:
- MH Connectors
- RS-stocknr.:
- 787-3791
- Fabrikantnummer:
- MHD45PK25-DB25P-K
- Fabrikant:
- MH Connectors
Wetgeving en compliance
- Land van herkomst:
- CN
Productomschrijving
D-Sub Connector Kits with Angled Metalized Plastic Hoods
These Kits of MH Connectors D-Sub MHD45PK Series are 45° angled ABS Nickel plated backshells with either Pin or Socket connectors. The mating part of the stamped contacts in these D-Sub MHD45PK Series Kits are Gold plated with the Solder Bucket terminations being Tin plated.
The Kits comprise of:
Plug or Socket Connector with Solder Buckets
2 Backshell halves
2 4-40 Thumbscrews (except the 9 way which only has one on the none cable entry side)
2 Housing screws and 2 nuts
1 Set of compression inserts for 4, 5, 7 and 9 mm diameter cable (Note maximum cable diameter is 13 mm)
2 Backshell halves
2 4-40 Thumbscrews (except the 9 way which only has one on the none cable entry side)
2 Housing screws and 2 nuts
1 Set of compression inserts for 4, 5, 7 and 9 mm diameter cable (Note maximum cable diameter is 13 mm)
Approvals
ABS polylac-UL recognised nickel plated
D-Sub Connector Kits - MH
A range of D-sub Kits which contain a connector, hood and associated screws and cable glands or clamps as specified.
Specificaties
Kenmerk | Waarde |
---|---|
Number of Contacts | 25 |
Gender | Male |
Body Orientation | Straight |
Termination Method | Solder |
Housing Material | Plastic |
Contact Plating | Nickel over Copper |
Series | MHD45PK |