Linear Technology LTC3545EUD#PBF, Triple, Step Down DC-DC Converter 16-Pin, QFN

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Step-Down (Buck) Regulators, Multiple Output, Linear Technology

The Linear Technology multiple output step down regulators have both monolithic and controller types which are either synchronous or non-synchronous configurations. These highly efficient buck regulators have input voltages up to 36 volts and switching frequencies up to 2.25MHz. Applications include telecom, networks and Industrial equipment as well as high density point of load regulation.

Switching Voltage Regulators, Linear Technology

Linear Technology product series of synchronous and non-synchronous internal switching regulator ICs offer high efficiency plus a wide input voltage range and switching frequencies up to 4MHz.
The controllers span over several types of configurations from buck (step-down), boost (step-up), buck-boost, forward, Isolated, Inverting and flyback controllers. The Flyback, Forward and Isolated Controllers primary and secondary side provide a solution to help replace the DC/DC bricks that get used in back-plane power conversion.

Specificaties
Kenmerk Waarde
Minimum Output Voltage 0.6 V
Minimum Input Voltage 2.25 V
Maximum Input Voltage 5.5 V
Converter Type Step Down
Number of Outputs 3
Output Type Fixed
Mounting Type Surface Mount
Package Type QFN
Pin Count 16
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
Length 3mm
Switching Regulator Yes
Dimensions 3 x 3 x 0.7mm
Efficiency 95%
Width 3mm
Height 0.7mm
Maximum Switching Frequency 2.7 MHz
Load Regulation 0.5 %
Line Regulation 0.15 %/V
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 03-04-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
4,58
(excl. BTW)
5,54
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 4,58
10 - 120
€ 4,49
121 - 241
€ 4,40
242 - 604
€ 4,31
605 +
€ 4,22
Verpakkingsopties
Related Products
A range of SEPIC DC-DC Converters from Linear ...
Description:
A range of SEPIC DC-DC Converters from Linear Technology which can be used in applications where the output voltage may be either higher or lower than the input voltage. The SEPIC (Single-Ended Primary-Inductor Converter) topology also allows these converters to ...
Linear Technology's offer a selection of inverting switching ...
Description:
Linear Technology's offer a selection of inverting switching regulators, these regulators are designed to invert input voltages to negative outputs. Offering input voltages up to 60V and switch currents up to 10A with adjustable or fixed outputs. They may also ...
Linear Technology presents step-up (boost) switching regulators with ...
Description:
Linear Technology presents step-up (boost) switching regulators with both synchronous and non-synchronous internal switches. The high efficient DC-DC converters have a wide range of input voltages and switching frequencies. Some products feature unique properties that can help increase battery run ...
Linear Technology presents a range of micropower monolithic ...
Description:
Linear Technology presents a range of micropower monolithic step-down buck converters these are intended for applications that need to increase efficiency at light loads. These devices produce low standby quiescent currents when in burst mode. They can be used in ...