Electromen OY, DC Motor Controller, Analogue Control, 20 → 60 V, 10 A, DIN Rail

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FI
Productomschrijving

Small size
High current output
Current limit
Zero current limit
Overvoltage brake
Speed setting
Flexible control inputs
Impulse / continuous mode
Rail base mountable
Digital parameter setting
48V version of EM-241C
Current limit setting input ( new )
Freewheel options ( new )
2 or 16kHz PWM freq. ( new )
Prog ver C-v1.5
Eight input logic option
Overvoltage range increased
Analog speed input range set

Specificaties
Kenmerk Waarde
Supply Voltage 20 → 60 V
Current Rating 10 A
Voltage Rating 60 V
Compatible Motor Type D.C Motor
Control Input Analogue
Mounting Style DIN Rail
Length 45mm
Width 80mm
Depth 45mm
Dimensions 45 x 80 x 45 mm
Operating Temperature Range -40 → +60 °C
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
112,71
(excl. BTW)
136,38
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 112,71
Related Products
Analog feedback5V, 10V or 4-20mA controlPosition accuracy max. ...
Description:
Analog feedback5V, 10V or 4-20mA controlPosition accuracy max. 0,1%Solid state power stageSmall size, great performanceDigitally settable parametersVerstile dynamic settingsHousing options availablePwm Freq, 2/16kHz ( since prog. v1.3 )Improved accurate , parameter 17, prog. ( v1.4).
To the motors with HALL sensorsThree phase outputSpeed ...
Description:
To the motors with HALL sensorsThree phase outputSpeed and torgue adjustmentOpen/closed loop modesDynamic brakingControl output for cooling fan.True 4Q-power stageBraking resistor outputSelectable brake modeCurrent limit and tripSymmetrical control option ±5V or ±10VFault and overcurrent outputsGood efficiencyLow ...
This small set point isolator module accepts virtually ...
Description:
This small set point isolator module accepts virtually all standard industrial control voltages (i.e. 0-5V, 0-10V, 4-20mA, 0-20mA). Also incorporated are relays to control the reversing version of the low power motor controllers. Provides intrinsically safe control voltages for mains ...
The motor drive is a PWM-based DC-motor driver. ...
Description:
The motor drive is a PWM-based DC-motor driver. The materials and features meet the industrial environment requirements. The device is CE marked and has been tested through EMC measurements required by industrial environment.Motor voltage is regulated against supply voltage changes, ...