Electromen OY, DC Motor Controller, Analogue Control, 11 → 35 V dc, 4 A, DIN Rail

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FI
Productomschrijving

EM-291A is brushless DC-motor driver for motors with hall sensor feedback. The unit has a mosfet power stage with good efficiency and it meets also todays EMC requirements. The unit has the basic digital command inputs like direction, start/stop, and analog input for speed control. Device has one NPN output for fault and overcurrent indication use. Indication output functions can be defined with parameter. The fault situations are also indicated with on-board LED.There are two control options for speed. Direct control ( open loop ) sets motor voltage in proportion to control voltage as with a standard DC-motor. Closed loop mode uses hall sensor feedback for speed control. This mode offers good speed regulation. Start and stop ramps are working in both mode. Speed adjust range, closed loop rpm range and ramps can be set with parameters. Analog input is filtered, so that also PWM signal of PLC can be used to control speed.Parameter setting can be done digitally with EM-236 interface unit or with Emen-Tool lite PC-programand EM-268 adapter. There is also an option to use iPhone with Ementool-APP and EM-326 adapter. The Parameters setting are stored into driver's nonvolatile memory .The parameter interfaces can be also used for motor current monitoring.

Three phase output
Speed adjustment
Current limit and trip.
Open/closed loop modes
Settable Indication output
Good efficiency
Low EMC emissions
DIN-rail mountable

Specificaties
Kenmerk Waarde
Supply Voltage 11 → 35 V dc
Current Rating 4 A
Voltage Rating 35 V dc
Compatible Motor Type Brushless DC Motor
Control Input Analogue
Mounting Style DIN Rail
Length 72mm
Width 65mm
Depth 20mm
Dimensions 72 x 65 x 20 mm
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
114,80
(excl. BTW)
138,91
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 114,80
Related Products
Small sizeHigh current outputCurrent limitZero current limitOvervoltage brakeSpeed ...
Description:
Small sizeHigh current outputCurrent limitZero current limitOvervoltage brakeSpeed settingFlexible control inputsImpulse / continuous modeRail base mountableDigital parameter setting48V version of EM-241CCurrent limit setting input ( new )Freewheel options ( new )2 or 16kHz PWM freq. ( new )Prog ver C-v1.5Eight ...
High current outputBrake load outputCurrent limitCurrent limit for ...
Description:
High current outputBrake load outputCurrent limitCurrent limit for brake alsoZero-current limitSpeed setting/adjustmentFlexible control inputsImpulse / continuous modeRail base mountableDigital parameter settingC versions program2/16kHz pwm freq. optionsFreewheel optionsAutoreverse optionRunning indication ...
Analog feedback5V, 10V or 4-20mA controlPosition accuracy max. ...
Description:
Analog feedback5V, 10V or 4-20mA controlPosition accuracy max. 0,1%Solid state power stageSmall size, great performanceDigitally settable parametersVerstile dynamic settingsHousing options availablePwm Freq, 2/16kHz ( since prog. v1.3 )Improved accurate , parameter 17, prog. ( v1.4).
Quadrature pulse countingMultiple dynamic settingsSolid state power stageOne ...
Description:
Quadrature pulse countingMultiple dynamic settingsSolid state power stageOne or two pulse feedbackVoltage or mA controlPosition accuracy max. 0.2%Versatile setting optionsDigitally settable parametersHousing options available.