RS PRO, DC Motor Controller, Potentiometer Control, 10 17 V dc, 15 A, Skeleton/Boxed

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Series 2600 Reversible Motor Controller

Microprocessor powered controller for permanent magnet, shunt wound, flat style and general purpose dc. motors.

Operates from a battery or rectified smooth dc. supply
12 or 24V dc. supply voltage
15 or 30A current rated version
Forward and reverse direction control
Protected against short circuit to output and polarity misconnection

Adjustable up to 15 or 30A continuous rating, 27 or 56A peak
Settable presets for high or low speed, overcurrent, acceleration or deceleration
Fault indication via flashing LED for overcurrent, current tripped, low supply voltage, over temperature
Over current and thermal protection, progressive thermal shutdown

Specificaties
Kenmerk Waarde
Supply Voltage 10 17 V dc
Current Rating 15 A
Voltage Rating 12 V
Compatible Motor Type Permanent Magnet, Shunt
Control Input Potentiometer
Mounting Style Skeleton/Boxed
Length 148mm
Width 132mm
Depth 24mm
Dimensions 148 x 132 x 24 mm
Operating Temperature Range +50 +65 °C
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
204,33
(excl. BTW)
247,24
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 204,33
Related Products
This range of cost effective low voltage dc. ...
Description:
This range of cost effective low voltage dc. motor controllers are suitable for use with permanent magnet dc. motors up to 12A. The boxed version is protected to IP22.,Comprehensive instruction sheet supplied. Adjustable maximum and minimum speedsIR compensationAdjustable overloadFused input ...
Analog feedback5V, 10V or 4-20mA controlPosition accuracy max. ...
Description:
Analog feedback5V, 10V or 4-20mA controlPosition accuracy max. 0,1%Solid state power stageSmall size, great performanceDigitally settable parametersVerstile dynamic settingsHousing options availablePwm Freq, 2/16kHz ( since prog. v1.3 )Improved accurate , parameter 17, prog. ( v1.4).
Quadrature pulse countingMultiple dynamic settingsSolid state power stageOne ...
Description:
Quadrature pulse countingMultiple dynamic settingsSolid state power stageOne or two pulse feedbackVoltage or mA controlPosition accuracy max. 0.2%Versatile setting optionsDigitally settable parametersHousing options available.
The drive is designed for modern automation systems. ...
Description:
The drive is designed for modern automation systems. Control can be performed easily with relay or open collector outputs. Analogue controls work with ±10V voltage. Usable motor can be permanent magnet motor with brushes,in power range of 5 to 80 ...