RS PRO, DC Motor Controller, Potentiometer Control, 19 34 V dc, 30 A, Skeleton/Boxed

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Series 2600 Reversible Motor Controller

Microprocessor powered controller for permanent magnet, shunt wound, flat style and general purpose dc. motors.

Operates from a battery or rectified smooth dc. supply
12 or 24V dc. supply voltage
15 or 30A current rated version
Forward and reverse direction control
Protected against short circuit to output and polarity misconnection

Adjustable up to 15 or 30A continuous rating, 27 or 56A peak
Settable presets for high or low speed, overcurrent, acceleration or deceleration
Fault indication via flashing LED for overcurrent, current tripped, low supply voltage, over temperature
Over current and thermal protection, progressive thermal shutdown

Specificaties
Kenmerk Waarde
Supply Voltage 19 34 V dc
Current Rating 30 A
Voltage Rating 24 V
Compatible Motor Type Permanent Magnet, Shunt
Control Input Potentiometer
Mounting Style Skeleton/Boxed
Length 148mm
Width 132mm
Depth 24mm
Dimensions 148 x 132 x 24 mm
Operating Temperature Range +50 +65 °C
7 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
39 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
234,30
(excl. BTW)
283,50
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 234,30
Related Products
Compact non-isolated motor speed control modules for dc. ...
Description:
Compact non-isolated motor speed control modules for dc. shunt wound and permanent magnet field motors. DIN rail mountingSuitable for 110//120 or 220/240V single phase ac. supplies (switch selectable)Fully isolated heatsinkControl signals available for zero speed, drive health and speed trimAdjustable ...
Linear servo control amplifier used to control motors ...
Description:
Linear servo control amplifier used to control motors up to 50WSuitable for a wide range of motors including the Maxon RE36 and A-Max 324 quadrant operation5 operating modes , (IxR, voltage regulation, digital encoder, dc tacho, current control)External DIP switch ...
The motor drive is a PWM-based DC-motor driver. ...
Description:
The motor drive is a PWM-based DC-motor driver. The materials and features meet the industrial environment requirements. The device is CE marked and has been tested through EMC measurements required by industrial environment.Motor voltage is regulated against supply voltage changes, ...
A selection guide for MFA Como Geared Motors ...
Description:
A selection guide for MFA Como Geared Motors available:. Forward and reverse PWM speed regulatorEasy installation - unit panel mounted through 9.5mm hole. (Electrical connection via screw terminals)6 → 15V operation d.c. (from smooth non digital d.c. input)Output 0 → ...