RS PRO, DC Motor Controller, Potentiometer Control, 12 V dc, 24 V dc, 24 A, Panel Mount

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Low Voltage Type 2021

Suitable for permanent magnet and wound field dc motors
Supply 12 or 24Vdc battery or linear power supply
Continuous rating 24A, maximum current limited to less than 36A
Adjustable electronic current limit up to 36A
Speed control by potentiometer
Soft start
Heatsink thermally protected
Running/Fault/Trip indication
Adjustable load compensation
Single quadrant drive

Specificaties
Kenmerk Waarde
Supply Voltage 12 V dc, 24 V dc
Current Rating 24 A
Voltage Rating 24 V dc
Compatible Motor Type Permanent Magnet, Shunt
Control Input Potentiometer
Mounting Style Panel Mount
Length 181mm
Width 84mm
Depth 51mm
Dimensions 181 x 84 x 51 mm
8 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
168,91
(excl. BTW)
204,38
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 168,91
Related Products
SIRIUS 3RM1 motor starters are compact devices 22.5 ...
Description:
SIRIUS 3RM1 motor starters are compact devices 22.5 mm wide, combining a large number of functions in a single enclosure.They consist of combinations of relay contacts, power semiconductors (hybrid technology), and a solid-state overload relay for switching induction under normal ...
This small set point isolator module accepts virtually ...
Description:
This small set point isolator module accepts virtually all standard industrial control voltages (i.e. 0-5V, 0-10V, 4-20mA, 0-20mA). Also incorporated are relays to control the reversing version of the low power motor controllers. Provides intrinsically safe control voltages for mains ...
This module is a 4-quadrant, linear output driver ...
Description:
This module is a 4-quadrant, linear output driver which is suitable for driving small dc. motors and gear motors up to 60 watts. Only single polarity voltage supply is required to achieve bi-directional motor speed controlEmploys armature feedback technique to ...
Microprocessor powered controller for permanent magnet, shunt wound, ...
Description:
Microprocessor powered controller for permanent magnet, shunt wound, flat style and general purpose dc. motors. Operates from a battery or rectified smooth dc. supply12 or 24V dc. supply voltage15 or 30A current rated versionForward and reverse direction controlProtected against short ...