Electromen OY, DC Motor Controller, Potentiometer Control, 12 → 24 V dc, 3 A, Panel Mount

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FI
Productomschrijving

EM-185 DC Motor Speed Regulator

The motor drive is a PWM-based DC-motor driver. The materials and features meet the industrial environment requirements. The device is CE marked and has been tested through EMC measurements required by industrial environment.Motor voltage is regulated against supply voltage changes, and there is also a load compensation (RxI) adjustment. Thanks to these features drive offers good performance in motor speed control applications. The current limit and the rpm range are adjustable with trimmer potentiometers. The power stage of the device is protected against short-circuit and overload (over temp.).The drive is easy to mount in a 10mm hole in an assembly panel.

Features & Benefits

1 Quadrant
Panel mountable
Small size
Motor power 5-80W
Load compensation Rxl
Adjustable current limit
EMC tested (CE marked)
Overload and short circuit protected

Specificaties
Kenmerk Waarde
Supply Voltage 12 → 24 V dc
Current Rating 3 A
Voltage Rating 35 V
Control Input Potentiometer
Mounting Style Panel Mount
Length 37mm
Width 30mm
Operating Temperature Range 0 → +60 °C
20 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
44 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
106,20
(excl. BTW)
128,50
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 106,20
Related Products
This range of cost effective low voltage dc. ...
Description:
This range of cost effective low voltage dc. motor controllers are suitable for use with permanent magnet dc. motors up to 12A. The boxed version is protected to IP22.,Comprehensive instruction sheet supplied. Adjustable maximum and minimum speedsIR compensationAdjustable overloadFused input ...
Microprocessor powered controller for permanent magnet, shunt wound, ...
Description:
Microprocessor powered controller for permanent magnet, shunt wound, flat style and general purpose dc. motors. Operates from a battery or rectified smooth dc. supply12 or 24V dc. supply voltage15 or 30A current rated versionForward and reverse direction controlProtected against short ...
The ADS50 is a powerful servo amplifier for ...
Description:
The ADS50 is a powerful servo amplifier for the control of brushed permanent magnet dc. motors. Four operating modes can be selected by DIP switches on the amplifierSpeed control using tacho, encoder or IR compensation or torque (current) control are ...
Suitable for permanent magnet and wound field dc ...
Description:
Suitable for permanent magnet and wound field dc motorsSupply 12 or 24Vdc battery or linear power supplyContinuous rating 24A, maximum current limited to less than 36AAdjustable electronic current limit up to 36ASpeed control by potentiometerSoft startHeatsink thermally protectedRunning/Fault/Trip ...