RS PRO, DC Motor Controller, 6 → 15 V dc, 3 A, Panel Mount

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

919D Series Bi-Directional Speed Controller

Forward and reverse PWM speed regulator
Easy installation - unit panel mounted through 9.5mm hole. (Electrical connection via screw terminals)
6 → 15V operation d.c. (from smooth non digital d.c. input)
Output 0 → 100% of input voltage
Compact construction - board size 66 x 58mm

MFA Como Geared Motors

A selection guide for MFA Como Geared Motors available:

Multi-ratio spur geared motors:

Suitable for low torque R&D and education applications
Useful in seeking suitable speeds for applications by selecting the appropriate ratio and/or voltage

Metal single ratio spur geared motors mounted on steel brackets:

Suitable for industrial/modelling applications
Economical and easily accessible

Metal single ratio epicyclic geared motors:

Suitable for industrial/modelling applications
Higher efficiency than spur (can be above 90%)
Smaller size and weight for the same or similar rating
Can be equally efficient in either direction
Co-axial configuration of input and output shafts allows inline installation with motor and machine

Specificaties
Kenmerk Waarde
Supply Voltage 6 → 15 V dc
Current Rating 3 A
Voltage Rating 6 → 15 V dc
Compatible Motor Type Brushed DC Motor
Mounting Style Panel Mount
Length 66mm
Width 58mm
Depth 40mm
Dimensions 66 x 58 x 40 mm
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
39 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
28,43
(excl. BTW)
34,40
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 28,43
Related Products
The MCLM 3002 series motion controllers from Faulhaber ...
Description:
The MCLM 3002 series motion controllers from Faulhaber are easy to use single axis positioning controllers. They have been designed for the control of Faulhaber DC, brushless and linear motors. Supplied with an RS232 interface, and are ideal for applications ...
This small set point isolator module accepts virtually ...
Description:
This small set point isolator module accepts virtually all standard industrial control voltages (i.e. 0-5V, 0-10V, 4-20mA, 0-20mA). Also incorporated are relays to control the reversing version of the low power motor controllers. Provides intrinsically safe control voltages for mains ...
Microprocessor powered controller for permanent magnet, shunt wound, ...
Description:
Microprocessor powered controller for permanent magnet, shunt wound, flat style and general purpose dc. motors. Operates from a battery or rectified smooth dc. supply12 or 24V dc. supply voltage15 or 30A current rated versionForward and reverse direction controlProtected against short ...
The drive is designed for modern automation systems. ...
Description:
The drive is designed for modern automation systems. Control can be performed easily with relay or open collector outputs. Analogue controls work with ±10V voltage. Usable motor can be permanent magnet motor with brushes,in power range of 5 to 80 ...