Maxon, DC Motor Controller, 1 Phase, Analogue, Digital Control, 10 50 V dc, 15 A, Flange Mount

  • RS-stocknr. 774-0503
  • Fabrikantnummer 409510
  • Fabrikant Maxon
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

ESCON DC Servo Controllers

A range of Escon controllers from Maxon that are small but powerful 4- Quadrant PWM servo controllers for the highly efficient control of permanent magnet activated DC motors. The controllers are reliable and are protected against overcurrent, under and overvoltage, excess temperature, short circuits in the motor cable, voltage transients and can also help protect both load and motor with protected digital inputs and outputs and an adjustable current limitation. The brushless DC motors have various operating modes which include speed controller (closed loop) which compares the actual speed signal with an applied set value. In case of deviation, the speed is dynamically readjusted, and speed controller (open loop) which feeds the motor with a voltage proportional to the applied speed set value.

Note

They have a wide range of functionalities with digital and analogue inputs and outputs and are configured over the USB interface using the graphic user interface "ESCON Studio" for Windows PCs.

DC Drives - Brushless

Specificaties
Kenmerk Waarde
Supply Voltage 10 50 V dc
Current Rating 15 A
Voltage Rating 50 V
Compatible Motor Type Brushless DC Motor, Permanent Magnet
Control Input Analogue, Digital
Mounting Style Flange Mount
Phase 1
Length 115mm
Width 75.5mm
Depth 24mm
Dimensions 115 x 75.5 x 24 mm
Operating Temperature Range -30 +45 °C
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
7 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
291,98
(excl. BTW)
353,30
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 291,98
Related Products
This range of cost effective low voltage dc. ...
Description:
This range of cost effective low voltage dc. motor controllers are suitable for use with permanent magnet dc. motors up to 12A. The boxed version is protected to IP22.,Comprehensive instruction sheet supplied. Adjustable maximum and minimum speedsIR compensationAdjustable overloadFused input ...
The 514C range of isolated dc motor speed ...
Description:
The 514C range of isolated dc motor speed controllers provide fully regenerative (four quadrant) control of dc shunt and permanent magnet motors. They are particularly suitable for overhauling load applications or where accurately controlled braking is required. Fully regenerative, four-quadrant ...
The Module has a variety of uses which ...
Description:
The Module has a variety of uses which include the speed control of motors up to 3 Amps maximum current consumption. Pulse Width Modulation provides proportional output control and torque maintenance. Output control is achieved by varying the output pulse. ...
Suitable for permanent magnet and wound field dc ...
Description:
Suitable for permanent magnet and wound field dc motorsSupply 12 or 24Vdc battery or linear power supplyContinuous rating 24A, maximum current limited to less than 36AAdjustable electronic current limit up to 36ASpeed control by potentiometerSoft startHeatsink thermally protectedRunning/Fault/Trip ...