Sprint Electric, DC Motor Controller, Voltage Control, 12 V dc, 8 A, DIN Rail Mount

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Sprint Electric DC Motor Controller - XLV Range

The XLV range of DC servo controllers are designed for use with permanent magnet brushed DC servo motors rated from 4 to 12 amps, offered in a compact easy to use DIN rail mounting package.

The controllers can be used in either current (torque) or speed control modes. For highly dynamic applications, a shaft-mounted DC tacho-generator is recommended for speed feedback but in less demanding applications, armature voltage feedback (Avf) can be used.

The reference signal for both current and speed control can be either bipolar (10V) or unipolar (0 – 10V). Motor speed can be controlled in both forward and reverse directions. An adjustable current limit and fast-acting current control loop protect the controller and motor from sustained overloads.


XLV DC Servo Controller
Torque or speed control mode
Versions with 4, 8 and 12 amps available
Overload till 200% for one second
DIN rail mounting
External speed setting potentiometer available, stock no. 891-9019

Specificaties
Kenmerk Waarde
Supply Voltage 12 V dc
Current Rating 8 A
Voltage Rating 12 V
Compatible Motor Type Brushed DC Servo Motor
Control Input Voltage
Mounting Style DIN Rail Mount
Length 60mm
Width 105mm
Depth 120mm
Dimensions 60 x 105 x 120 mm
Operating Temperature Range 0 → +40 °C
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
Compact non-isolated motor speed control modules for dc. ...
Description:
Compact non-isolated motor speed control modules for dc. shunt wound and permanent magnet field motors. DIN rail mountingSuitable for 110//120 or 220/240V single phase ac. supplies (switch selectable)Fully isolated heatsinkControl signals available for zero speed, drive health and speed trimAdjustable ...
This module is a 4-quadrant, linear output driver ...
Description:
This module is a 4-quadrant, linear output driver which is suitable for driving small dc. motors and gear motors up to 60 watts. Only single polarity voltage supply is required to achieve bi-directional motor speed controlEmploys armature feedback technique to ...
Linear servo control amplifier used to control motors ...
Description:
Linear servo control amplifier used to control motors up to 50WSuitable for a wide range of motors including the Maxon RE36 and A-Max 324 quadrant operation5 operating modes , (IxR, voltage regulation, digital encoder, dc tacho, current control)External DIP switch ...
The motor drive is a PWM-based DC-motor driver. ...
Description:
The motor drive is a PWM-based DC-motor driver. The materials and features meet the industrial environment requirements. The device is CE marked and has been tested through EMC measurements required by industrial environment.Motor voltage is regulated against supply voltage changes, ...