Actuonix, Linear Actuator Control Board, Analogue, Digital Control, 5 → 24 V dc, 4 A, Panel Mount

  • RS-stocknr. 918-1372
  • Fabrikantnummer LAC-RS
  • Fabrikant Actuonix
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Linear Actuator Control Board

The LAC board from Actuonix is a standalone closed loop control board specially designed for the P series actuators. By using this LAC board with Actuonix actuators you can greatly simplify motor control designs, saving cost and time.
Actuonix motor control IC uses a software-based algorithm which optimises position and speed control. The linear actuator board is then compatible with a wide range of actuators, using only the default settings.
Full customisation is possible due to Actuonix Advanced Configuration Program.
The LAC can be operated as an interface board or a standalone controller with the addition of an external potentiometer and power supply.

Control Modes

0 V to 3.3 V Interface Mode

This mode allows an actuator to be controlled with just a battery, and a potentiometer to signal the desired position to the actuator.

RC Servo Interface Mode

A standard hobby-type remote-control digital servo interface, compatible with servos and receivers from other manufacturers.

4 mA to 20 mA Interface Mode

This mode is compatible with PLC devices typically used in industrial control applications.

PWM Mode

This mode allows control of the actuator using a single digital output pin from an external micro controller.

USB Mode

This mode allows control of the actuator via the computer.

Features and Benefits

• Several control modes available
• Compatible with P series actuators
• Can be operated as an interface board or standalone controller

Application Information

The LAC works with the PQ12-P, L12-P, L16-P and P16-P series actuators. It can also be able to drive other larger actuators that have position feedback.

Note

A 6 vdc or 12 vdc power supply is required for operation (not included)

Micro Linear Actuators

Specificaties
Kenmerk Waarde
Supply Voltage 5 → 24 V dc
Current Rating 4 A
Voltage Rating 3.3 V
Control Input Analogue, Digital
Mounting Style Panel Mount
Length 50mm
Width 50mm
Operating Temperature Range -10 → +70 °C
16 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
36 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
71,49
(excl. BTW)
86,50
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 71,49
5 - 9
€ 68,62
10 +
€ 65,77
Related Products
This range of cost effective low voltage dc. ...
Description:
This range of cost effective low voltage dc. motor controllers are suitable for use with permanent magnet dc. motors up to 12A. The boxed version is protected to IP22.,Comprehensive instruction sheet supplied. Adjustable maximum and minimum speedsIR compensationAdjustable overloadFused input ...
Suitable for permanent magnet and wound field dc ...
Description:
Suitable for permanent magnet and wound field dc motorsSupply 12 or 24Vdc battery or linear power supplyContinuous rating 24A, maximum current limited to less than 36AAdjustable electronic current limit up to 36ASpeed control by potentiometerSoft startHeatsink thermally protectedRunning/Fault/Trip ...
The motor drive is a PWM-based DC-motor driver. ...
Description:
The motor drive is a PWM-based DC-motor driver. The materials and features meet the industrial environment requirements. The device is CE marked and has been tested through EMC measurements required by industrial environment.Motor voltage is regulated against supply voltage changes, ...
Sprint Electric 200XLV is the ideal drive for ...
Description:
Sprint Electric 200XLV is the ideal drive for use with small DC motors and linear actuators up to 48V. With the fast response times and flexibility of optional functions such as 3 term PID control action and setpoint control for ...