Mellor Electric, DC Motor Controller, 1 Phase, Potentiometer, Voltage Control, 24 V dc, 500 mA, Screw Mount

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Mellor Brushless DC Motor Controller

DC Motor controller is designed for use with Brushless DC motors with hall-feedback. The controller requires an external 24 V dc and can be installed using screws or standard rail mounting base. It features easy set speed adjustment, direction change and braking. The controller also includes several control modes; internal or external proportional control or external input, 0-10 V or PWM selectable. PWM selectable can set the speed of rotation by an external device.
The controller is protected against reversed input voltage polarity and fuse protected against overcurrent.

• 24 V dc supply voltage
• Single phase output
• Direction change
• Brake system
• Hall-transducer
• Adjustable speed limit
• Direct or frequencies driving
• High efficiency
• In-built resettable fuse
• Rail mounting base available

DC Brushless Motors

A range of Brushless DC Motors with integrated communication electronics.
Speed control feedback via hall sensors.

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Current Rating 500 mA
Compatible Motor Type Brushless DC Motor
Control Input Potentiometer, Voltage
Mounting Style Screw Mount
Phase 1
Length 98mm
Width 67mm
Depth 15mm
Dimensions 98 x 67 x 15 mm
9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
7 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
90,37
(excl. BTW)
109,35
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 90,37
Related Products
This range of cost effective low voltage dc. ...
Description:
This range of cost effective low voltage dc. motor controllers are suitable for use with permanent magnet dc. motors up to 12A. The boxed version is protected to IP22.,Comprehensive instruction sheet supplied. Adjustable maximum and minimum speedsIR compensationAdjustable overloadFused input ...
Suitable for permanent magnet and wound field dc ...
Description:
Suitable for permanent magnet and wound field dc motorsSupply 12 or 24Vdc battery or linear power supplyContinuous rating 24A, maximum current limited to less than 36AAdjustable electronic current limit up to 36ASpeed control by potentiometerSoft startHeatsink thermally protectedRunning/Fault/Trip ...
To complement the RS range of small power ...
Description:
To complement the RS range of small power and low voltage controllers, they are available with the additional feature of control for both forward and reverse motor rotation direction. This feature can be particularly useful in many production and manufacturing ...
The motor drive is a PWM-based DC-motor driver. ...
Description:
The motor drive is a PWM-based DC-motor driver. The materials and features meet the industrial environment requirements. The device is CE marked and has been tested through EMC measurements required by industrial environment.Motor voltage is regulated against supply voltage changes, ...