RS PRO Brushed DC Motor, 41 W, 14.5 V dc, 13 Ncm, 3000 rpm, 6mm Shaft Diameter

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Low Profile dc Motors

Powerful, low profile motors offer many benefits when compared to a conventional permanent magnet dc motor.

Low profile construction requires less space than a conventional motor
Long motor life even when operated at full rating
High power to weight ratio
Very smooth running at slow speeds
Fast acceleration from rest under full load conditions
Low inductance
Low brush sparking
Low r.f.i. emissions
Available in two magnet materials:

M Style uses ferrite magnet material
N Style uses rare earth magnet material

N Style provides up to 2 1/2 times power, three times higher torque, from the same size motor compared with M type

Specificaties
Kenmerk Waarde
Supply Voltage 14.5 V dc
DC Motor Type Brushed
Power Rating 41 W
Output Speed 3000 rpm
Shaft Diameter 6mm
Maximum Output Torque 13 Ncm
Length 37.7mm
Dimensions 120 (Dia.) x 37.7 mm
Current Rating 6.9 A
Standards Met RoHS
7 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
4 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
165,79
(excl. BTW)
200,61
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 165,79
Related Products
Suitable for motion, movement or positioning applications, where ...
Description:
Suitable for motion, movement or positioning applications, where the user can select the drive or gearbox unit to be fitted. A d.c. motor which can be used either on their own or in combination with the adaptable gearboxes Quick change ...
Revised brushgear for improved commutation and reliabilityPinion fitted ...
Description:
Revised brushgear for improved commutation and reliabilityPinion fitted to motor shaft for fitment to suitable gearhead and are replacements for Model A 32mm motors (Discontinued stock no. 236-2704)Speed Constant: 396rpm/V (stock no. 420-4931); 250rpm/V (stock no. 420-4947).
Twin shaft motorFront shaft fitted with a pinion ...
Description:
Twin shaft motorFront shaft fitted with a pinion to enable this motor to be fitted to a suitable gearheadRear shaft is intended to accommodate a suitable encoder unitSpeed Constant: 396rpm/V (stock no. 420-5142); 250rpm/V (stock no. 420-5158).
These powerful pancake motors offer numerous additional advantages ...
Description:
These powerful pancake motors offer numerous additional advantages compared with conventional permanent magnet DC motors:. Flat designLong life when operating with highest nominal valuesHigh performance-to-weight ratioVery smooth operation at low speedsGood acceleration from idle state when fully loadedLow ...