Silicon Labs 8-bit USB Debug Adapter

  • RS-stocknr. 757-0297
  • Fabrikantnummer DEBUGADPTR1-USB
  • Fabrikant Silicon Labs
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Silicon Labs Debugger Adapter Board Debugadptr1-USB

The Silicon Labs 8-bit USB Debug Adapter (UDA) provides the interface between the PC’s USB port and the C8051Fxxx’s in-system debug/programming circuitry. This USB Debug Adapter is capable of providing power to some of the Silicon Labs circuit boards via pin 10 of the debug connector. This attached 10-pin debug ribbon cable connects the adaptor to a target board and the target devices debug interface signals. The adapter is powered from the USB connection to the PC. This USB cable is included as part of the USB debug adaptor. This USB Debug Adapter can automatically change the communication voltage level based on the level detected on pin 7 of the connector. It requires a target system clock of 32kHz or greater. The USB Debug Adapter uses the Human Interface Device (HID) USB interface to communicate with the PC.

Features and Benefits

USB debug adapter can supply up to 100mA to the target system
Has a reset button
Minimum C2 programming connections

Applications

Silicon laboratories
Used with C8051Fxxx
Used with EFM8 MCUs

Certifications

ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007

Specificaties
Kenmerk Waarde
Product Type Debugger
Kit Name 8-bit USB Debug Adapter
21 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
12 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
31,44
(excl. BTW)
38,04
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 31,44
Related Products
The Seeit universal programmer is a device reader/programmer/copier ...
Description:
The Seeit universal programmer is a device reader/programmer/copier supporting EPROMs (2716 to 27C801 family) of 16KB to 8MB, parallel EEPROMs (28C16 to 28C040 family) up to 4Mb, parallel FLASH memory (28xxx, 29xxx, 37xxx, 39xxx, 49xxx, etc.) of 512KB to 8MB, ...
Description:
Designed to prevent damage to the USB PIC Microcontroller during programmingLimits voltage at the VPP pin to 8.9VPrevents the voltage applied to D+/D- from exceeding 3.6VAutomatically protects USB data connections during the Program/Erase cycle (USB cable does not need to ...
From DISCERA, the Timeflash chip programming adaptor is ...
Description:
From DISCERA, the Timeflash chip programming adaptor is a simple Windows-based USB kit that allows you to custom program and verify any DSC8XXX programmable oscillator for any frequency with up to four decimal point resolution. CMOS, LVPECL, LVDS, and HCSL ...
The JTAG-HS2 programming cable allows high-speed programming of ...
Description:
The JTAG-HS2 programming cable allows high-speed programming of Xilinx FPGA devices from a host PC. • Compatible with all Xilinx tools• Compatible with IEEE 1149.7-2009 Class T0 - Class T4 (includes 2-Wire JTAG)• On-board ADP123AUJZ 300mA voltage regulator• Separate Vref ...