Weller T0051351399 Threaded Desoldering Tiplet

  • RS-stocknr. 517-615
  • Fabrikantnummer T0051351399
  • Fabrikant Weller
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

DS series suction nozzles, for DS 80, DSV 80

Desoldering nozzles with M5 thread for DS 80 and DSV 80

Nozzle no. Stock no. External-Ø Internal-Ø Length
DS110 517-586 1.9 0.7 12.7
DS111 517-592 2.5 0.7 12.7
DS112 517-609 2.3 1 12.7
DS113 517-615 2.5 1.2 12.7
DS114 517-621 3.3 1.8 12.7
DS115 517-637 1.9 0.7 19.05
DS116 517-643 2.7 1.2 19.05
//media.rs-online.com/t_line/L660797-01.gif

Tips

Specificaties
Kenmerk Waarde
Model Number DS 113
Type Threaded Tiplet
18 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
72 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
11,40
(excl. BTW)
13,79
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 11,40
Related Products
Compressed-air independent, analogue hot air station for desoldering ...
Description:
Compressed-air independent, analogue hot air station for desoldering large-area SMD components. Air flow and temperature are continuously adjustable. Integrated stand-by function for pre-heating the nozzle - can be switched off internally if required. Without vacuum for lifting the components. Temperature ...
Weller D17 filters are used within the glass ...
Description:
Weller D17 filters are used within the glass tube for the WXDP 120 desoldering iron. The filters are used inside the glass solder collection tube and prevent solder from being sucked into the vacuum tubing and pump. D17 FiltersMade from ...
The Metcal MX-500 Soldering, Desoldering & Rework System ...
Description:
The Metcal MX-500 Soldering, Desoldering & Rework System handles both SMT and through-hole soldering/rework with one power supply., Two switchable outputsSMT/De-soldering/Rework station, allowing quick removal and replacing of componentsRequires 60-100psi air supply40W rating at 22°C (72°F) ambientOperating ...
The Metcal MX-500 Soldering, Desoldering & Rework System ...
Description:
The Metcal MX-500 Soldering, Desoldering & Rework System handles both SMT and through-hole soldering/rework with one power supply., Two switchable outputsSMT/De-soldering/Rework station, allowing quick removal and replacing of componentsRequires 60-100psi air supply40W rating at 22°C (72°F) ambientOperating ...