Weller T0058741815N Filter Cartridge

  • RS-stocknr. 508-2940
  • Fabrikantnummer T0058741815N
  • Fabrikant Weller
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: MX
Productomschrijving

DXV 80 Desoldering Set

Desoldering iron for operation with all Weller desoldering units with 80 W supply
Finger switch to start the extraction process
Tin collection container comprising disposable cartridge and filter
Replacement suction nozzles available under Stock No. 405-3496 ff.

Station Irons - Weller

Specificaties
Kenmerk Waarde
Model Number 58.741-815
Type Filter Cartridge
10 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
44 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs 1 Bag of 5
12,60
(excl. BTW)
15,25
(incl. BTW)
Bag(s)
Per zak
Per stuk*
1 +
€ 12,60
€ 2,52
*prijsindicatie
Related Products
Compressed-air independent, analogue hot air station for desoldering ...
Description:
Compressed-air independent, analogue hot air station for desoldering large-area SMD components. Air flow and temperature are continuously adjustable. Integrated stand-by function for pre-heating the nozzle - can be switched off internally if required. Without vacuum for lifting the components. Temperature ...
Weller D17 filters are used within the glass ...
Description:
Weller D17 filters are used within the glass tube for the WXDP 120 desoldering iron. The filters are used inside the glass solder collection tube and prevent solder from being sucked into the vacuum tubing and pump. D17 FiltersMade from ...
The Metcal MX-500 Soldering, Desoldering & Rework System ...
Description:
The Metcal MX-500 Soldering, Desoldering & Rework System handles both SMT and through-hole soldering/rework with one power supply., Two switchable outputsSMT/De-soldering/Rework station, allowing quick removal and replacing of componentsRequires 60-100psi air supply40W rating at 22°C (72°F) ambientOperating ...
The Metcal MX-500 Soldering, Desoldering & Rework System ...
Description:
The Metcal MX-500 Soldering, Desoldering & Rework System handles both SMT and through-hole soldering/rework with one power supply., Two switchable outputsSMT/De-soldering/Rework station, allowing quick removal and replacing of componentsRequires 60-100psi air supply40W rating at 22°C (72°F) ambientOperating ...