CHIPQUIK SMD4.5 1.4m No Clean Desoldering Braid, Width 8mm

  • RS-stocknr. 146-6654
  • Fabrikantnummer SMD4.5
  • Fabrikant CHIPQUIK
Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: US
Productomschrijving

Chip Quik Alloy for SMD Removal (4.5ft. In 8-6.5in. Lengths) Leaded.

Easily remove SMD parts with Chip Quik® removal alloy
Reduce heat and reduce damage to circuit boards and SMD parts during removal
Use with SMD291 flux

Specificaties
Kenmerk Waarde
Width 8mm
Model Number SMD4.5
Length 1.4m
No Clean Yes
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
7 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs 1 Set
30,37
(excl. BTW)
36,75
(incl. BTW)
Set(s)
1 - 9
€ 30,37
10 - 19
€ 29,16
20 - 49
€ 28,25
50 +
€ 25,81
Related Products
Fast, safe, de-soldering braid specifically formulated for use ...
Description:
Fast, safe, de-soldering braid specifically formulated for use with Lead-free applications. More efficient than conventional de-soldering braidsNon-corrosive, ultra high purity no-clean fluxWill not leave ionic contamination on the boardsCan also be used with tin/lead solders.
Finely woven pure copper braid, quickly removes excess ...
Description:
Finely woven pure copper braid, quickly removes excess material during hand soldering rework. Braid is rigid to prevent unwanted flexing, absorbent and will not unravel when bit pressure is placed upon itFlux is a synthetic, non-corrosive medium which will not ...
De-soldering braid packaged in static dissipative bobbins. Significantly ...
Description:
De-soldering braid packaged in static dissipative bobbins. Significantly reduces rework/repair timeMinimises the risk of damage to the boardPatented non-corrosive, halide free, organic no-clean fluxBGA desolder braid is designed for removing solder from BGA pads and chips.
These desoldering wicks are supplied in an anti-static ...
Description:
These desoldering wicks are supplied in an anti-static case and require no cleaning after desoldering thanks to their copper braiding coated with a special halide-free synthetic resin.Solder is absorbed quickly, leaving only a negligible amount of residue that is non-corrosive ...