Loctıte 1.5m No Clean Desoldering Braid, Width 2.7mm

  • RS-stocknr. 331-9408
  • Fabrikantnummer NC-BB
  • Fabrikant Loctite
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

No-Clean Desoldering Wicks in 2 lengths

These desoldering wicks are supplied in an anti-static case and require no cleaning after desoldering thanks to their copper braiding coated with a special halide-free synthetic resin.
Solder is absorbed quickly, leaving only a negligible amount of residue that is non-corrosive and non-hygroscopic.

Wick & Braid

Specificaties
Kenmerk Waarde
Width 2.7mm
Length 1.5m
No Clean Yes
73 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
597 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
5,33
(excl. BTW)
6,45
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 5,33
10 - 19
€ 5,12
20 - 49
€ 4,95
50 +
€ 4,54
Related Products
Finely woven pure copper braid, quickly removes excess ...
Description:
Finely woven pure copper braid, quickly removes excess material during hand soldering rework. Braid is rigid to prevent unwanted flexing, absorbent and will not unravel when bit pressure is placed upon itFlux is a synthetic, non-corrosive medium which will not ...
Chip Quik Alloy for SMD Removal (16ft. In ...
Description:
Chip Quik Alloy for SMD Removal (16ft. In 30-6.5 in. Lengths) Leaded. Easily remove SMD parts with Chip Quik® removal alloyReduce heat and reduce damage to circuit boards and SMD parts during removalUse with SMD291 flux.
SMD Removal Kit (Same as the SMD1 but ...
Description:
SMD Removal Kit (Same as the SMD1 but with Lead-Free Chip Quik Alloy). Easily remove SMD parts with Chip Quik® removal alloyReduce heat and reduce damage to circuit boards and SMD parts during removalComes with SMD291 fluxRoHS II and Lead ...
Chip Quik Alloy for SMD Removal (4.5ft. In ...
Description:
Chip Quik Alloy for SMD Removal (4.5ft. In 8-6.5in. Lengths) Leaded. Easily remove SMD parts with Chip Quik® removal alloyReduce heat and reduce damage to circuit boards and SMD parts during removalUse with SMD291 flux.