Panasonic DIP Switch, SPST-NO, 10 mA @ 5 V dc

  • RS-stocknr. 756-1451
  • Fabrikantnummer ESE16J001
  • Fabrikant Panasonic
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

Panasonic Detector Switches - ESE Series

Detector Switches are used to detect mechanical movements and convert those or human manual operations, such as the closing of a mobile phone, to electronic signals. In some applications Detector Switches have been used to replace Encoders as a low cost solution.
This range of Detector Switches use a mechanical sliding spring design to ensure consistent signal output. They also have features that include long travel, thin profile, small size, various actuation angles and surface mount or J-bent terminal mounting options.
Detector Switches can be used in many applications that require detection of mechanical movement, e.g. battery insertion and door closure in hand held devices, consumer electronics, computer/peripherals, telecommunications, appliances, instrumentation and many more.

Industry’s smallest and thinnest switches
Low actuation force
Single pole with normally open or normally closed contacts
Reflow soldering (apart from stock number 756-1410 which can be wave soldered)

Detector Switches

Specificaties
Kenmerk Waarde
Contact Configuration SPST-NO
Mounting Type Surface Mount
Actuator Type Lever
Contact Current Rating 10 mA @ 5 V dc
Minimum Operating Temperature -10°C
Maximum Operating Temperature +60°C
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
The Alps SPVQ series are non-shorting, low-current, IP67 ...
Description:
The Alps SPVQ series are non-shorting, low-current, IP67 waterproof detector switches with a 3mm long travel that are designed for use in wet environments within industrial vehicles and in car open/close door detection and many other applications.These SPVQ waterproof detector ...
C&K’s series of surface mount half-pitch DIP switches, ...
Description:
C&K’s series of surface mount half-pitch DIP switches, low profile and standard profile DIP switches, rotary and coded DIP switches, coded rotary DIP switches, SIP switches and jumper switches feature a variety of extended actuator and flush actuator styles. C&K ...
The IKH DIP switch series are low profile ...
Description:
The IKH DIP switch series are low profile and are designed for reliable operation and have a small PCB space requirement. Process compatible (withstand IR reflow soldering) and washable (tape seal standard). 1,27 mm (.050) terminal to terminal pitchOverall height ...
C&K Detect Switches, With 19 different series of ...
Description:
C&K Detect Switches, With 19 different series of standard detect switches, C&K offers the largest selection in SMT, through-hole, panel and snap-in/chassis and screw-mount versions. C&K’s detect switches are offered in a variety of sizes and shapes, with various actuator ...