Panasonic DIP Switch, SPST-NO, 10 mA @ 5 V dc

  • RS-stocknr. 756-1527
  • Fabrikantnummer ESE22MV21T
  • Fabrikant Panasonic
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

Panasonic Detector Switches - ESE Series

Detector Switches are used to detect mechanical movements and convert those or human manual operations, such as the closing of a mobile phone, to electronic signals. In some applications Detector Switches have been used to replace Encoders as a low cost solution.
This range of Detector Switches use a mechanical sliding spring design to ensure consistent signal output. They also have features that include long travel, thin profile, small size, various actuation angles and surface mount or J-bent terminal mounting options.
Detector Switches can be used in many applications that require detection of mechanical movement, e.g. battery insertion and door closure in hand held devices, consumer electronics, computer/peripherals, telecommunications, appliances, instrumentation and many more.

Industry’s smallest and thinnest switches
Low actuation force
Single pole with normally open or normally closed contacts
Reflow soldering (apart from stock number 756-1410 which can be wave soldered)

Detector Switches

Specificaties
Kenmerk Waarde
Contact Configuration SPST-NO
Mounting Type Surface Mount
Actuator Type Lever
Contact Current Rating 10 mA @ 5 V dc
Minimum Operating Temperature -10°C
Maximum Operating Temperature +70°C
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
ADE and ADF series through hole mounting 7.5 ...
Description:
ADE and ADF series through hole mounting 7.5 x 3.5mm DIP switches with a 2.54mm centerline, gold flash plated contacts and black PPS housings. The ADE series DIP switches have extended slide actuators whilst the ADF series DIP switcheshave flush ...
The low profile IKD DIP switch is designed ...
Description:
The low profile IKD DIP switch is designed for reliable operation with positive detent action. Available 1 to 12 poles, surface mount or through hole mounting. Self cleaning wiping contactsGold plated terminalsSMT Gull wing or J bendProcess compatible IP reflow ...
The low profile IKD DIP switch is designed ...
Description:
The low profile IKD DIP switch is designed for reliable operation with positive detent action. Available 1 to 12 poles, surface mount or through hole mounting. Self cleaning wiping contactsGold plated terminalsSMT Gull wing or J bendProcess compatible IP reflow ...
The SIRIUS 3SE5 Series hinge switch is designed ...
Description:
The SIRIUS 3SE5 Series hinge switch is designed for monitoring hinged doors and flaps. These mechanical position switches offer excellent protection from tampering thanks to the fixed, positive pivoting point connection between switch and door hinge. They have a standard ...