Development Kit BarGraph 2 Click for use with Building Vu-Meters, Gauges and Signal Indicators

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

BarGraph 2 click is a 10-segment bar graph display click, which uses a high-quality, multiColour bar graph LED display. The bar graph display is a very popular device for displaying various properties, whether it be an audio level, current/voltage level, position of the encoder, and generally any property that can be displayed in a form of a bar graph. The segments of the onboard bar graph LED display are bright and uniformly Coloured, providing a nice and clean visual feedback.

8-Bit Serial-In, Parallel-Out Shift
Wide Operating Voltage Range of 2 V to 6 V
High-Current 3-State Outputs Can Drive Up to 15 LSTTL Loads
Low Power Consumption: 80-μA (Maximum) ICC
tpd = 13 ns (Typical)
±6-mA Output Drive at 5 V
Low Input Current: 1 μA (Maximum)
Shift Register Has Direct Clear

Specificaties
Kenmerk Waarde
Accessory Type BarGraph 2 Click
For Use With Building Vu-Meters, Gauges and Signal Indicators
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
18,70
(excl. BTW)
22,63
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 18,70
Related Products
The SigFox click is a device which carries ...
Description:
The SigFox click is a device which carries the SN10-11, a fully integrated module by InnoComm, allowing connection to a low power wide area network (LPWAN) that enables communication utilizing the Industrial, Scientific, and Medical (ISM) radio frequency band. The ...
Compact 6-channel spectrometry solutionSimple text-based command interface via ...
Description:
Compact 6-channel spectrometry solutionSimple text-based command interface via UART, or direct register read and write with interrupt on sensor ready option on I²CLifetime-calibrated sensing with minimal drift over time or temperatureNo additional signal conditioning requiredElectronic shutter ...
Position Sensorless BLDC Drivers (no Hall Sensor required)180° ...
Description:
Position Sensorless BLDC Drivers (no Hall Sensor required)180° Sinusoidal Drive for High Efficiency and Low Acoustic NoiseSupports 2V to 14V Power SuppliesSpeed Control through Power Supply Modulation (PSM) and/or Pulse-Width Modulation (PWM)Built-In Frequency Generator (FG output signal)Built-In Lock-Up ...
Multifunction photometric sensor and signal conditioning Fully integrated ...
Description:
Multifunction photometric sensor and signal conditioning Fully integrated AFE, ADC, LED driver, and timing core Usable for multiple optical measurement applications, including gesture control and proximity sensing Enables an ambient light rejection capability using both optical and analogue filtering On-chip ...