FTDI Chip, 5 V TTL Wire End USB to UART Cable - TTL-232RG-VSW5V-WE

  • RS-stocknr. 730-0155
  • Fabrikantnummer TTL-232RG-VSW5V-WE
  • Fabrikant FTDI Chip
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

FTDI Chip USB To UART Cable

The FTDI chip USB to UART cable is a fast and simple way to connect devices with a TTL level serial interface to USB. It is available with TTL logic level of 5V. Each cable contains a small internal electronic circuit board, utilising the FT232R, encapsulated into the USB connector at the end of the cable. The cable has a gauge of 24AWG and diameter of 5mm. They are un-terminated, bare and tinned wires. The circuit is powered from the USB using 5V power pins and any VCC connection, always at 5VDC. These cables are supported with Microsoft WHQL certified VCP drivers for Windows, Apple Mac, and Linux.

Features and Benefits

Connect directly to a microcontroller UART or I/O pins
Data transfer rate is up to 3Mbps
Generic converter cable provides a USB to TTL Serial interface with various logic levels
Low USB bandwidth consumption
Maximum output of 450mA on VCC
Operating temperature ranges between -40°C and 85°C
Powered from USB connector
Six core cable with length of 1.8m
Unique serial number attached, used for security purposes while transferring files via cable
USB 2.0 compatible
Various UART-end connector options available

Applications

Communication
Embedded system

Certifications

CE
FCC certified

537 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
18,99
(excl. BTW)
22,98
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 18,99
10 - 19
€ 18,04
20 - 49
€ 17,15
50 - 99
€ 16,29
100 +
€ 15,47
Related Products
This range of socket cards from Atmel allows ...
Description:
This range of socket cards from Atmel allows you to connect a range of different pin type and size devices to the ATK600 Starter Kit.•PDIP8/14/20/28/40 720-0143•QFN32 769-1653•QFN44 769-1669•QFN48 769-1650•QFN64 769-1656•QFP32 0.8 mm pitch 720-0153•QFP44 0.8 mm pitch ...
The Power Debugger is a powerful development tool ...
Description:
The Power Debugger is a powerful development tool for debugging and programming AVR microcontrollers. The tool is using UPDI, JTAG, PDI, debugWIRE, aWire, TPI or SPI target interfaces. It is using JTAG or SWD target interfaces for the ARM Cortex-M ...
The JTAG-SMT2 surface-mount programming module allows high-speed programming ...
Description:
The JTAG-SMT2 surface-mount programming module allows high-speed programming of Xilinx FPGA devices from a host PC. Users can solder the module directly onto a target board like any other component. Note: The JTAG-SMT2-NC part (RS 134-6473) does not have a ...
The JTAG-HS3 programming cable allows high-speed programming/debugging of ...
Description:
The JTAG-HS3 programming cable allows high-speed programming/debugging of Xilinx FPGA and SoC devices from a host PC. • Separate Vref drives JTAG signal voltages• Vref can be any voltage between +1.8V and +5V• USB 2.0 HS port drives JTAG bus ...