AD8123ACPZ Analog Devices, 3-Channel Differential Line Receiver 40-Pin LFCSP VQ

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Differential Amplifiers, Analog Devices

Differential Amplifiers by Analog Devices are integrated and optimised for differential signalling applications. These speciality amplifiers have inherent common mode rejection properties that provide a low harmonic distortion with an output gain and phase matching. Applications include driving or receiving signals over long cable lengths, driving a balanced ADC input and looking for complementary outputs.

Differential Amplifiers, Analog Devices

Specificaties
Kenmerk Waarde
Power Supply Type Dual
Typical Dual Supply Voltage ±4.5 → ±5.5V
Maximum Input Resistance 3.7 (Differential) MΩ, 4.4 (Common Mode) MΩ
Maximum Voltage Gain 1V/V
Minimum CMRR -86dB
Number of Channels per Chip 3
Mounting Type Surface Mount
Package Type LFCSP VQ
Pin Count 40
Maximum Supply Current 1.1 μA
Dimensions 6 x 6 x 0.95mm
Maximum Operating Temperature +85 °C
Height 0.95mm
Length 6mm
Minimum Operating Temperature -40 °C
Width 6mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 28-10-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Tray of 490)
10,504
(excl. BTW)
12,71
(incl. BTW)
Aantal stuks
Per stuk
Per tray*
490 +
€ 10,504
€ 5.146,96
*prijsindicatie
Related Products
High performance operational amplifiers (op amps) intended for ...
Description:
High performance operational amplifiers (op amps) intended for use in high quality audio applications and other areas where low noise, low distortion and high speed are required.
Low Voltage Differential Signaling, or LVDS, is an ...
Description:
Low Voltage Differential Signaling, or LVDS, is an electrical signaling system that can run at very high speeds over cheap, twisted-pair copper cables. Applications: Firewire, SATA, SCSI.
The AD594/595/596/597 series of type J/K thermocouple amplifiers ...
Description:
The AD594/595/596/597 series of type J/K thermocouple amplifiers are a combination of an instrumentation amplifier and thermocouple cold junction compensator roviding an output of 10mV/°C.AD594 for type J thermocouples, optimised operating temperature range 0°C to 50°CAD595 for type K thermocouples, ...
Current loop systems are used in electrically noisy ...
Description:
Current loop systems are used in electrically noisy industrial environments for sending analogue sensor data over long distances of 300m or more.