Digital Isolator 5.5 V 1 μA 5kVrms 2.5ns 20 Surface Mount 15.54mm 7.59mm 2.44mm -40°C +125°C

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

The ADuM4154 is an SPIsolator™ digital isolator optimized for a serial peripheral interface (SPI) that includes support for up to four slave devices. Based on the Analog Devices, Inc., iCoupler® chip scale transformer technology, the low propagation delay and jitter in the CLK, MO/SI, MI/SO, and SS SPI bus signals support SPI clock rates of up to 17 MHz. The ADuM4154 isolator also provides a slave select multiplexing system that allows up to four slave devices to be serviced from one isolator. When a target slave is selected, the slave select signal propagates to the desired output with low propagation delay, allowing tight timing control. The isolated SSx is addressed through a 250 kbps low speed, 2-channel address bus, allowing the target slave device to be changed in as little as 2.5 μs.

Supports up to 17 MHz SPI clock speed
4 high speed, low propagation delay, SPI signal isolation channels
Supports up to 4 slave devices
20-lead SOIC_IC package with 8.3 mm creepage
High temperature operation: 125°C
High common-mode transient immunity: >25 kV/μs
Applications
Industrial programmable logic controllers (PLCs)
Sensor isolation

Specificaties
Kenmerk Waarde
Maximum Forward Voltage 5.5 V
Maximum Input Current 1 μA
Isolation Voltage 5kVrms
Rise Time 2.5ns
Number of Pins 20
Mounting Type Surface Mount
Length 15.54mm
Width 7.59mm
Depth 2.44mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +125°C
Series ADUM4154
Supply Voltage 3 → 5.5 V
31 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Tube of 31)
5,649
(excl. BTW)
6,835
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
31 - 31
€ 5,649
€ 175,119
62 - 279
€ 5,369
€ 166,439
310 +
€ 4,785
€ 148,335
*prijsindicatie