RS PRO IDM106N Handheld Digital Multimeter, 10A ac 1000V ac 10A dc 1000V dc

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

RS PRO IDM106N RMS Digital Multimeter

RS PRO IDM106N offers high specification performance with 4000 count display and 42 segment bar graph. These handheld devices can measure capacitance, voltage, electrical current, frequency, peak hold, temperature and resistance with diode and continuity check. This meter has an LCD display where the measurement readouts can be viewed.

RS PRO range of handheld and bench digital multimeters are RS approved meaning that they are great value for money and high quality you can rely on.

Features and Benefits

10 A (continuous) current range
Data hold/relative modes
1 MHz counter with full 9999 Count display
Diode test and continuity sounder
4 nF to 40 μF capacitance ranges
Mains proof resistance ranges
Full autoranging with manual override
Auto power shutdown
Digital display update rate 2 per second
Bargraph display update rate 20 per second
Fused 400 mA and 10A ranges
Dust and water protected to IP64
Water resistant via O-Ring sealed case
Dual high energy fuse protection
AC - Coupled AC conversion true RMS responding to the RMS sine wave input

What does it measure?

DC and AC voltages - up to 1000 V
DC and AC current - up 10A
Resistance and continuity checking - up to 40 MΩ
Capacitance - up to 40 mF
Frequency - up to 400 MHz

Display

The LED-backlit display turns ON/OFF at the touch of a button and automatically turns off to save battery life.

RS-232 Optical Interface

The IDM106N has an RS-232 optical interface to connect to a PC for data acquisition. Allowing measurements to be transferred to a PC for further analysis.

Batteries

Batteries can be easily replaced by unscrewing two screws to remove the battery door for battery replacement. Designed for users convenience without opening the bottom case.

Extra Protection

The multimeter is supplied with a protective holster that includes a built-in stand, a nail hook and convenient test lead storage. This holster provides an extra degree of protection and convenience.

What does it include?

Pair of Test Leads
Battery (Installed)
Test Clips
User Manual
Protective Holster

Typical Applications:
A digital multimeter is a handy test tool that measures electrical values such as voltage, current, and resistance. A DMM is used by technicians in the following areas:
Electrical and electronic industries

Safety guidelines
When using any electrical test equipment it is advised that you refer to the user’s manual for proper working operating procedures and safety precautions in order to avoid potential safety hazards.

What is the difference between an analogue and a digital multimeter?

The main difference is the display. A digital multimeter will show the results as numbers on a screen (usually a LED or LCD screen) whereas the analogue version has a needle to show the value.

Warning

  • When using test leads or probes, keep your fingers behind the finger guards. Remove test lead from the meter before opening the battery door or meter case.
Specificaties
Kenmerk Waarde
Multimeter Type Handheld
Absolute Maximum AC Current Measurement 10A ac
Absolute Maximum DC Current Measurement 10A dc
Absolute Maximum Resistance Measurement 40MΩ
Absolute Maximum AC Voltage Measurement 1000V ac
Absolute Maximum DC Voltage Measurement 1000V dc
Absolute Maximum Temperature Measurement +800 °C, +1472 °F
Absolute Maximum Capacitance Measurement 40mF
Functions Measured AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode Test, Frequency, Peak Hold, Resistance, Temperature
True RMS Yes
Maximum Frequency 400MHz
Display Type LCD
Model Number p IDM106N
AC Current Measurement Resolution 10µA ac
DC Current Measurement Resolution 10µA dc
DC Voltage Measurement Resolution 100µV dc
AC Voltage Measurement Resolution 0.1mV ac
Resistance Measurement Resolution 100mΩ
Capacitance Measurement Resolution 1pF
Length 100mm
Width 55mm
Best AC Current Accuracy ±1.5% + 5 Digits
Safety Category Level CAT II, CAT III
Weight 620g
Battery Life 300 h
Safety Category Voltage 600 V, 1000 V
Best DC Current Accuracy ±0.4% + 2 Digits
Best Temperature Measurement Accuracy ±1 %
Best DC Voltage Accuracy ±0.1% + 2 Digits
Dimensions 100 x 55 x 212 (with Holster)mm
Height 212mm
Minimum Operating Temperature 0°C
Best Capacitance Measurement Accuracy ±2% + 8 Digits
Best AC Voltage Accuracy ±1.5% + 5 Digits
Maximum Operating Temperature +50°C
Best Resistance Measurement Accuracy ±0.4% + 2 Digits
Battery Type IEC 6F22, JIS 006P, NEDA 1604, 9V
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
24 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
164,94
(excl. BTW)
199,58
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 164,94
Kalibratie-opties
Related Products
FLIR DM284 is an all in one industrial ...
Description:
FLIR DM284 is an all in one industrial digital multimeter and thermal imager, ideal for fast and reliable inspections from DIY Projects to industrial. electrical, mechanical and HVAC/R systems. The DM284 can show you exactly where an electrical problem is ...
FLIR DM284 is an all in one industrial ...
Description:
FLIR DM284 is an all in one industrial digital multimeter and thermal imager, ideal for fast and reliable inspections from DIY Projects to industrial. electrical, mechanical and HVAC/R systems. The DM284 can show you exactly where an electrical problem is ...
Measuring low DC currents may demand more than ...
Description:
Measuring low DC currents may demand more than a DMM can deliver. Electrometers measure low currents but have costly circuitry and functions. The Keithley 6485 5-digit Picoammeter offers sensitive current measurement instrumentation with enhanced speed and robust design. With eight ...
The Keithley 6517B Electrometer is a high resistance ...
Description:
The Keithley 6517B Electrometer is a high resistance 5-digitmultimeter that is the worldwide research laboratory standard for sensitive measurements. 6517B provides reliable measurements of current levels down to 10aA, charge levels down to 1 fC including the highest resistance measurements ...