RS PRO IDM91E Handheld Digital Multimeter, 10A ac 600V ac 10A dc 600V dc

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

RS PRO IDM91E Rugged Industrial Digital Multimeter

RS PRO IDM91E digital multimeter (DMM) designed for harsh environments. This handheld DMM is a tool which can measure capacitance, voltage, electrical current and resistance with diode and continuity check. The rugged body guarantees drop prof resistance from up to 1.5 m. The multimeter is also waterproof with a rating of IP54. Featuring fuse protection on both 200 mA and 10 A current ranges and a specially designed beep guard system. That system provides a constant beep warning if the test leads put in the current jacks and select an incorrect function.

The meter is supplied with a protective holster that includes a built-in tilt stand, a nail hook, and convenient test lead storage. This holster provides an extra degree of protection and convenience for your meter.

RS PRO IDM 91E Multimeters are designed to meet Class II IEC 1010 and UL 3111 standards for the safest operation in all applications.

This device has been designed for the most demanding users that value solid construction and highly accurate measurements.

Features and Benefits

• 3 1/2 digit LCD
• 0.5% basic DCV accuracy
• 1.3% basic ACV accuracy
• 1.0% basic DCA accuracy
• 1.5% basic ACA accuracy
• 0.75% basic OHM accuracy
• Continuity and diode test
• 500V dual-fuse protection
• Auto power-off
• Beep Guard™ warning system
• Water resistant rating IP64
• 1.5m (5 feet) dropproof
• Protective holster with tilt stand
• IEC 1010-1 CAT.III 600V/ CAT.II 1000V
• One set of 1:1 probe

What does it measure?

DC and AC Voltages - up to 600 V
DC and AC Current - up to 10A
Resistance and continuity checking - up to 20 MΩ
Diode - open circuit voltage up to 3.2V

Batteries?

300 Hours (Alkaline)
Single 9V (NEDA 1604 or IEC 6F22)
Low battery indicator
Auto power off - approx 30 minutes after the last operation

What It Incudes?

Installed battery
Test Leads
User manual
Protective holster

Dimensions:

Without Holster:
Width 84 mm
Length 175 mm
Height 31 mm
With Holster:
Width 95 mm
Length 192 mm
Height 50 mm

Typical Applications:
A digital multimeter is a handy test tool that measures electrical values such as voltage, current, and resistance. A DMM is used by technicians in the following areas:
Electrical and electronic industries

Safety guidelines
When using any electrical test equipment it is advised that you refer to the user’s manual for proper working operating procedures and safety precautions in order to avoid potential safety hazards.

Standards

IEC 61010-1, CAT.III 300 v, CAT.II 600 V

Specificaties
Kenmerk Waarde
Multimeter Type Handheld
Absolute Maximum AC Current Measurement 10A ac
Absolute Maximum DC Current Measurement 10A dc
Absolute Maximum Resistance Measurement 20MΩ
Absolute Maximum DC Voltage Measurement 600V dc
Absolute Maximum AC Voltage Measurement 600V ac
Functions Measured AC Current, AC Voltage, Continuity, DC Current, DC Voltage, Diode Test, Resistance
True RMS No
Display Type LCD
Model Number p IDM91E
AC Current Measurement Resolution 0.1µA
DC Current Measurement Resolution 0.1µA
DC Voltage Measurement Resolution 0.1mV dc
Resistance Measurement Resolution 100mΩ
AC Voltage Measurement Resolution 0.1mV ac
Minimum Operating Temperature 0°C
Height 192mm
Battery Life 300 h
Weight 550 (With Holster)g
Safety Category Level CAT III
Best DC Voltage Accuracy ±0.5% + 1 Digits
Best DC Current Accuracy ±1% + 1 Digits
Dimensions 95 x 50 x 192mm
Length 95mm
Safety Category Voltage 600V
Battery Type IEC 6F22, NEDA 1604, 9V
Width 50mm
Maximum Operating Temperature +50°C
Best Resistance Measurement Accuracy ±0.75% + 1 Digits
Best AC Current Accuracy ±2.5% + 3 Digits
Best AC Voltage Accuracy ±1.25% + 4 Digits
56 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
357 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
64,00
(excl. BTW)
77,44
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 64,00
Kalibratie-opties
Related Products
FLIR DM285 Imaging Multimeter with IGM is a ...
Description:
FLIR DM285 Imaging Multimeter with IGM is a professional, all-in-one True RMS digital multimeter and thermal imager. The DM285 can show you exactly where an electrical problem is to speed up troubleshooting. Featuring Infrared Guided Measurement (IGM) technology powered by ...
The DMM6500 is a modern bench/system DMM delivering ...
Description:
The DMM6500 is a modern bench/system DMM delivering more measurement functionality, best-in-class measurement insight, and a price that will not break your budget. The most recognizable feature of the DMM6500 is the large 5-inch (12.7 cm) capacitive touch screen display ...
The DMM6500 is a modern bench/system DMM delivering ...
Description:
The DMM6500 is a modern bench/system DMM delivering more measurement functionality, best-in-class measurement insight, and a price that will not break your budget. The most recognizable feature of the DMM6500 is the large 5-inch (12.7 cm) capacitive touch screen display ...
Safety: CAT II 600 V. Compact milliohmmeter plus ...
Description:
Safety: CAT II 600 V. Compact milliohmmeter plus multimeter and thermometer for measuring low-impedance transitionsKelvin connection (four-conductor measurement)DATA hold memory for up to 1200 readingsFunctions: min, max, data hold.