RS Pro IDM103N Handheld Digital Multimeter With RSCAL calibration , 10A ac 1000V ac 10A dc 1000V dc

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

RS PRO IDM103N Digital Multimeter

RS PRO IDM103N digital multimeters are handheld devices which can measure capacitance, voltage, electrical current and resistance with diode and continuity check. This meter has an LCD display where the measurement readouts can be viewed.

This digital multimeter offers high specification performance with 4000 Count display and 42 segment bar graph.

RS PRO range of handheld and bench digital multimeters are RS approved meaning that they are great value for money and high quality you can rely on.

Features and Benefits

10 A (continuous) current range
Data hold/relative modes
1 MHz counter with full 9999 Count display
Diode test and continuity sounder
4 nF to 40 μF capacitance ranges
Mains proof resistance ranges
Full autoranging with manual override
Auto power shutdown
Digital display update rate 2 per second
Bargraph display update rate 20 per second
Fused 400 mA and 10A ranges
Dust and water protected to IP64
Water resistant via O-Ring sealed case
Dual high energy fuse protection

What does it measure?

DC and AC voltages - up to 1000 V
DC and AC current - up 10A with 10 mA resolution
Resistance and continuity checking - up to 40 MΩ
Capacitance - up to 40 mF
Frequency - up to 400 MHz

Extra Protection

The multimeter is supplied with a protective holster that includes a built-in stand, a nail hook and convenient test lead storage. This holster provides an extra degree of protection and convenience.

Display

The LED-backlit display turns ON/OFF at the touch of a button and automatically turns off to save battery life.

RS-232 Optical Interface

The IDM103N has an RS-232 optical interface to connect to a PC for data acquisition. Allowing measurements to be transferred to a PC for further analysis.

Batteries

Batteries can be easily replaced by unscrewing two screws to remove the battery door for battery replacement. Designed for users convenience without opening the bottom case.

What does it include?

Pair of Test Leads
Test Clips
User Manual
Protective Holster

Typical Applications:
A digital multimeter is a handy test tool that measures electrical values such as voltage, current, and resistance. A DMM is used by technicians in the following areas:
Electrical and electronic industries

Safety guidelines
When using any electrical test equipment it is advised that you refer to the user’s manual for proper working operating procedures and safety precautions in order to avoid potential safety hazards.

What is the difference between an analogue and a digital multimeter?
The main difference is the display. A digital multimeter will show the results as numbers on a screen (usually a LED or LCD screen) whereas the analogue version has a needle to show the value.

Warning

  • When using test leads or probes, keep your fingers behind the finger guards. Remove test lead from the meter before opening the battery door or meter case.
Specificaties
Kenmerk Waarde
Multimeter Type Handheld
Absolute Maximum AC Current Measurement 10A ac
Absolute Maximum DC Current Measurement 10A dc
Calibrated RSCAL
Absolute Maximum DC Voltage Measurement 1000V dc
Absolute Maximum AC Voltage Measurement 1000V ac
Absolute Maximum Resistance Measurement 40MΩ
Absolute Maximum Capacitance Measurement 40mF
True RMS No
Maximum Frequency 40MHz
Display Type LCD
Model Number p IDM103N
AC Current Measurement Resolution 10µA ac
DC Current Measurement Resolution 10µA dc
Resistance Measurement Resolution 100mΩ
DC Voltage Measurement Resolution 100µV dc
AC Voltage Measurement Resolution 0.1mV ac
Capacitance Measurement Resolution 1pF
Best DC Current Accuracy ±0.6% + 2 Digits
Safety Category Voltage 600 V, 1000 V
Battery Type AAA 1.5 V, AM4, IEC LR03
Maximum Operating Temperature +50°C
Best Resistance Measurement Accuracy ±0.6% + 3 Digits
Safety Category Level CAT II, CAT III
Dimensions 100 x 55 x 212 (with Holster)mm
Minimum Operating Temperature 0°C
Best Capacitance Measurement Accuracy ±2% + 8 Digits
Best AC Voltage Accuracy ±1.3% + 5 Digits
Best DC Voltage Accuracy ±0.25% + 2 Digits
Weight 620g
Battery Life 500 h
Height 212mm
Best AC Current Accuracy ±1.5% + 5 Digits
Width 55mm
Length 100mm
89 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
164,32
(excl. BTW)
198,83
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 164,32
Related Products
The Beha-Amprobe AM-500-EUR Digital Multimeter Series is a ...
Description:
The Beha-Amprobe AM-500-EUR Digital Multimeter Series is a full line of digital multimeters that offer functions for every application. These tough meters are designed to be a reliable, feature-rich and rugged solution for taking critical measurements in residential, HVAC, electrical ...
Fluke 175 Series digital multimeters, offers precision, reliability ...
Description:
Fluke 175 Series digital multimeters, offers precision, reliability and ease of use. The ideal choice for troubleshooting and repairing all your electrical and electronic systems. True RMS digital multimeters ensures accurate results even when testing on irregular AC circuits. • ...
Keysight U1233A Series handheld digital multimeters are designed ...
Description:
Keysight U1233A Series handheld digital multimeters are designed to perform in poor environmental conditions and worst-case scenarios. With the built in flashlight, the ergonomic shaped handheld digital multimeter allows you to single handedly illuminate the test area while selecting measurements ...
The Keithley 2110 5-digit dual-display digital multimeter is ...
Description:
The Keithley 2110 5-digit dual-display digital multimeter is optimized for a variety of general-purpose system and bench design applications. Compared with other leading 5-digit DMMs, the 2110 offers excellent throughput (up to 10x faster), accuracy (up to 2x better DC ...