RS Pro IDM71 Handheld Digital Multimeter With UKAS calibration , 6mA ac 750V ac 6mA dc 1000V dc

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

RS PRO IDM71 Digital Multimeter

IDM71 are compact, rugged and high performing digital multimeters. These handheld devices can measure capacitance, voltage, electrical current and resistance with diode and continuity check. This meter has an LCD display where the measurement readouts can be viewed. The highest measuring category allows measurements direct at the source of the low voltage installation. Features optical interface for transmitting measuring results to PCs.

RS PRO have a great range of meters that are RS approved meaning that they are great value for money and high quality you can rely on.

Features and Benefits

Handy and compact housing
Large-scale display
6000 display count
DCA μA
Data Hold
Min / Max function
Frequency Counter
Capacitance Measurement
Auto Power Off
Shock resistant (1 m drop)
Protective Holster with tilt stand and lead storage

What does it measure?

DC and AC Voltages - up to 1000 V dc
DC and AC Current - up to 600μA
Resistance and continuity tester - up to 60 MΩ
Diode - open circuit voltage up to 3 V
Capacitance - range from 6 nF to 6 mF

Extra Protection

The multimeter is supplied with a protective holster that includes a built-in stand, a nail hook and convenient test lead storage. This holster provides an extra degree of protection and convenience.

Slim Design

Ergonomically designed slim shape with one handed operating knob and buttons. It just fits into the palm of your hand.

RS-232 Optical Interface

The IDM73N has an RS-232 optical interface to connect to a PC for data acquisition. Allowing measurements to be transferred to a PC for further analysis.

Batteries

Batteries can be easily replaced by unscrewing only two screws to remove the battery door for battery replacement. Designed for users convenience without opening the bottom case.

Display

The LED-backlit display turns ON/OFF at the touch of a button and automatically turns off to save battery life.

What does it include?

Pair of Test Leads
Battery (Installed)
Protective Holster
User Manual

Typical Applications:
A digital multimeter is a handy test tool that measures electrical values such as voltage, current, and resistance. A DMM is used by technicians in the following areas:
Electrical and electronic industries

Safety guidelines

When using any electrical test equipment it is advised that you refer to the user’s manual for proper working operating procedures and safety precautions in order to avoid potential safety hazards.

What is the difference between an analogue and a digital multimeter?

The main difference is the display. A digital multimeter will show the results as numbers on a screen (usually a LED or LCD screen) whereas the analogue version has a needle to show the value.

Specificaties
Kenmerk Waarde
Multimeter Type Handheld
Absolute Maximum DC Current Measurement 6mA dc
Absolute Maximum AC Current Measurement 6mA ac
Calibrated UKAS
Absolute Maximum AC Voltage Measurement 750V ac
Absolute Maximum DC Voltage Measurement 1000V dc
Absolute Maximum Resistance Measurement 60MΩ
Absolute Maximum Capacitance Measurement 6mF
True RMS Yes
Maximum Frequency 60MHz
Display Type LCD
Model Number p IDM71
DC Current Measurement Resolution 0.1µA
DC Voltage Measurement Resolution 0.1mV dc
AC Voltage Measurement Resolution 0.1mV ac
Resistance Measurement Resolution 100mΩ
Capacitance Measurement Resolution 1pF
Battery Type AAA 1.5 V, AM4, IEC LR03
Best Resistance Measurement Accuracy ±0.7% + 2 Digits
Height 158 (Without Holster) mm, 164 (With Holster) mm
Weight 400g
Safety Category Voltage 600 V, 1000 V
Battery Life 300 h
Length 76 (without Holster) mm, 82 (with Holster) mm
Best DC Current Accuracy ±1% + 2 Digits
Width 38 (Without Holster) mm, 44 (With Holster) mm
Minimum Operating Temperature 0°C
Safety Category Level CAT III, CAT IV
Dimensions 76 x 38 x 158 (without Holster) mm, 82 x 44 x 164 (with Holster) mm
Best DC Voltage Accuracy ±0.5% + 2 Digits
Maximum Operating Temperature +50°C
Best AC Current Accuracy ±1.5% + 5 Digits
Best Capacitance Measurement Accuracy ±1.9% + 8 Digits
Best AC Voltage Accuracy ±0.9% + 5 Digits
118 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
135,00
(excl. BTW)
163,35
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 135,00
Related Products
Combines the advantages of an analogue instrument with ...
Description:
Combines the advantages of an analogue instrument with the safety features and reliability of a digital instrument. 9 DC voltage ranges: 150mV to 1500V6 AC voltages ranges: 5V to 1500V7 DC current ranges: 50μA to 10A6 AC current ranges: 500mA ...
RS PRO IDM91E digital multimeter (DMM) designed for ...
Description:
RS PRO IDM91E digital multimeter (DMM) designed for harsh environments. This handheld DMM is a tool which can measure capacitance, voltage, electrical current and resistance with diode and continuity check. The rugged body guarantees drop prof resistance from up to ...
RS PRO IDM106N offers high specification performance with ...
Description:
RS PRO IDM106N offers high specification performance with 4000 count display and 42 segment bar graph. These handheld devices can measure capacitance, voltage, electrical current, frequency, peak hold, temperature and resistance with diode and continuity check. This meter has an ...
RS PRO RSDM3055 (123-6465) is a 5 digit ...
Description:
RS PRO RSDM3055 (123-6465) is a 5 digit multimeter with a dual-readout display. RS PRO RSDM3055A (123-6466) is of similar specification but, in addition, includes a USB to GPIB adapter. These devices can measure capacitance, voltage, electrical current, frequency, period, ...