RS Pro IDM73 Handheld Digital Multimeter With RSCAL calibration , 10A ac 750V ac 10A dc 1000V dc

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

RS PRO IDM73 Digital Multimeter

The RS PRO IDM73 is a compact, rugged and high performing digital multimeter. These handheld devices can measure capacitance, voltage, electrical current and resistance with diode and continuity check. This meter has an LCD display where the measurement readouts can be viewed.
The highest measuring category allows measurements direct at the source of the low voltage installation. Features optical interface for transmitting measuring results to PCs.

RS PRO have a great range of meters that are RS approved meaning that they are great value for money and high quality you can rely on.

Features and Benefits

Handy and compact housing
Large-scale display
6000 display count
DCA μA
Data Hold
Min / Max function
Frequency Counter
Capacitance Measurement
Auto Power Off
Shock resistant (1 m drop)
Protective Holster with a tilt stand and lead storage
Large-scale display
True RMS reading on AC mode
DCA μA, A
ACA A (True RMS)
Optional RS-232 interface and software

What does it measure?

DC and AC Voltages - up to 1000 V dc and 750 V ac
DC and AC Current - up to 10 Amps
Resistance and continuity checking - up to 200 MΩ
Diode - open circuit voltage up to 3 V
Capacitance - range from 6 nF to 6 mF

Extra Protection

The multimeter is supplied with a protective holster that includes a built-in stand, a nail hook and convenient test lead storage. This holster provides an extra degree of protection and convenience.

Slim Design

Ergonomically designed slim shape with one-handed operating knob and buttons. It just fits into the palm of your hand.

RS-232 Optical Interface

The IDM73 has an RS-232 optical interface to connect to a PC for data acquisition. Allowing measurements to be transferred to a PC for further analysis.

Batteries

Batteries can be easily replaced by unscrewing only two screws to remove the battery door for battery replacement. Designed for users convenience without opening the bottom case.

Display

The LED display turns ON/OFF at the touch of a button, and automatically turns off to save battery life.

What does it include?

Pair of Test Leads
Battery (Installed)
Protective Holster
User Manual

Typical Applications:
A digital multimeter is a handy test tool that measures electrical values such as voltage, current, and resistance. A DMM is used by technicians in the following areas:
Electrical and electronic industries

Safety guidelines
When using any electrical test equipment it is advised that you refer to the user’s manual for proper working operating procedures and safety precautions in order to avoid potential safety hazards.

Standards

CAT. IV 600 V / CAT. III 1000 V

Specificaties
Kenmerk Waarde
Multimeter Type Handheld
Absolute Maximum DC Current Measurement 10A dc
Absolute Maximum AC Current Measurement 10A ac
Calibrated RSCAL
Absolute Maximum AC Voltage Measurement 750V ac
Absolute Maximum Resistance Measurement 60MΩ
Absolute Maximum DC Voltage Measurement 1000V dc
Absolute Maximum Capacitance Measurement 6mF
True RMS Yes
Maximum Frequency 60MHz
Display Type LCD
Model Number p IDM73
AC Current Measurement Resolution 0.1µA
DC Current Measurement Resolution 0.1µA
AC Voltage Measurement Resolution 0.1mV ac
DC Voltage Measurement Resolution 0.1mV dc
Resistance Measurement Resolution 100mΩ
Capacitance Measurement Resolution 1pF
Minimum Operating Temperature 0°C
Safety Category Level CAT III, CAT IV
Dimensions 76 x 38 x 158 (without Holster) mm, 82 x 44 x 164 (with Holster) mm
Best DC Voltage Accuracy ±0.5% + 2 Digits
Maximum Operating Temperature +50°C
Best AC Current Accuracy ±1.5% + 5 Digits
Width 38 (Without Holster) mm, 44 (With Holster) mm
Best Capacitance Measurement Accuracy ±1.9% + 8 Digits
Battery Life 300 h
Safety Category Voltage 600 V, 1000 V
Weight 400g
Best DC Current Accuracy ±1% + 2 Digits
Height 158 (Without Holster) mm, 164 (With Holster) mm
Battery Type IEC 6F22, NEDA 1604, 9V
Best Resistance Measurement Accuracy ±0.7% + 2 Digits
Length 76 (without Holster) mm, 82 (with Holster) mm
Best AC Voltage Accuracy ±0.9% + 5 Digits
257 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
134,00
(excl. BTW)
162,14
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 134,00
Related Products
The DM90 is an affordable True RMS digital ...
Description:
The DM90 is an affordable True RMS digital multimeter with a Type-K Thermocouple, an ideal tool for electricians, service technicians, and HVAC professionals to have on the job. With rich features including LoZ, VFD Mode and uA current measurement capability, ...
With its simple operation, compact design and ease ...
Description:
With its simple operation, compact design and ease of use, the Fluke 115 True RMS digital multimeter provides the perfect answer for general purpose electrical and electronic test requirements. An everyday multimeter for technicians, the 115 is for in field ...
The Chauvin Arnoux CA5231 true RMS digital Multimeters ...
Description:
The Chauvin Arnoux CA5231 true RMS digital Multimeters are ideal for the needs of electrical installers, self-employed electricians and heating or air-conditioning specialists. Compact and simple, they are exceptionally easy to read thanks to their large backlit display including a ...
The Chauvin Arnoux CA5233 true RMS digital Multimeters ...
Description:
The Chauvin Arnoux CA5233 true RMS digital Multimeters with Type K Adaptor are ideal for the needs of electrical installers, self-employed electricians and heating or air-conditioning specialists. Compact and simple, they are exceptionally easy to read thanks to their large ...