RS PRO LED Digital Panel Multi-Function Meter, 92mm x 92mm

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IN
Productomschrijving

4 Digit, 3 Line Digital Multi-function Meters

RS Pro digital panel meters measure important electrical parameters in 3 phase 4-wire and 3 phase three wire network and replaces the need for multiple analogue meters. It measures electrical parameters such as AC voltage, AC current, Frequency, Active, Reactive and more.

Features and Benefits

3 line, 4-digit ultra-bright LED display (up to 9999)
Fast and easy installation on panel with self-clicking
True RMS measurement
Limit switch (optional)
On-site programmable CT/PT ratios
User selectable CT secondary 1A/5A
User selectable PT secondary from 100 VLL to 500 VLL
User selectable 3 ph 3 wire/3 ph 4 wire/single phase network
2 Auxiliary power supply available 40 V-300 V ac/dc or 12 V-48 V dc
Storage of MIN/MAX values
Measurement and display of RPM, run hours, on hours, no. of interruption

RS Pro

Specificaties
Kenmerk Waarde
Properties Measured Current, Frequency, System Active Power, System Re-Active Power, Voltage
Display Type LED
Cutout Height 92mm
Cutout Width 92mm
Depth 55 (Without option)mm
Number of Digits 4
Minimum Temperature 0°C
Maximum Temperature +50°C
Approvals IEC 60529, IEC 61010-1:2001, IEC 61326-1:2005
Series AP15
Measurement Range 5 (Current) A, 65 (Frequency) Hz, 500 (AC RMS Input Voltage) V, 500 (Secondary Input Voltage) V, 692 (Primary Input Voltage) kV
Minimum Measurement 1 (Current) A, 45 (Frequency) Hz, 100 (Primary Input Voltage) kV, 100 (Secondary Input Voltage) V, 290 (AC RMS Input Voltage) V
Meter Type Digital
8 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
76,38
(excl. BTW)
92,42
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 76,38
Related Products
For measuring rate, ratios, differences and passing time ...
Description:
For measuring rate, ratios, differences and passing time applications. An encoder is used to provide a pulsed input, the meter then calculate based on this to provide the operation required. A power supply is an option available to power the ...
1/8DIN (48x96mm) fascia, 100/240Vac supply. Colour change display ...
Description:
1/8DIN (48x96mm) fascia, 100/240Vac supply. Colour change display to indicate process status and configurable bar graph for display of magnitude of input. Input ranges are scaleable linear AC current, DC current or DC voltage to cover all standard linear scales. ...
The DSD-40BCD digital slave display combines a full-size ...
Description:
The DSD-40BCD digital slave display combines a full-size 4.5 digit LED display with all the other necessary components, including a built-in, contrast-enhancing filter/bezel, to implement a pc-board mountable instrument display.The flexible design gives the user full control of all major ...
The SRP-457 digital process meter is equipped with ...
Description:
The SRP-457 digital process meter is equipped with one measurement input and a standard resistor protection circuit. The meter features a 4-button keyboard for basic programming settings, which is located under the front cover, for greater security. A remote control ...