Lumel N24-Z510300E0 , LED Digital Panel Multi-Function Meter for AC Signal, 92mm x 45mm

  • RS-stocknr. 171-8480
  • Fabrikantnummer N24-Z510300E0
  • Fabrikant Lumel
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: PL
Productomschrijving

Indicators of N24 series are destined for measurement of d.c. voltage or d.c. current, temperature from Pt100 sensors and J, K thermocouples, a.c. voltage and a.c. Current

4-digit LED display, digits of 20 mm high,
Possible configuration of parameters through the PD14 programmer and the free delivered LPConfig program,
precision of displayed results (decimal point),
measurement averaging time,
recounting of indications (individual characteristic),
automatic or manual compensation: temperature of cold junction for measurements with thermocouples or wire resistance for Pt100 sensors (N24T),
Supply: 85…253 V a.c./d.c. or 20…24 V a.c./d.c., 110 V a.c., 230 V a.c.
Overall dimensions: 96 x 48 x 64 mm

Specificaties
Kenmerk Waarde
Properties Measured AC Signal
Display Type LED
Cutout Height 92mm
Cutout Width 45mm
Number of Digits 4
Depth 64mm
Digit Height 20 mm
Minimum Temperature -10°C
Maximum Temperature +55°C
Series N24
Minimum Measurement 0.01 A, 0.05 A, 1 V ac, 2.5 V ac, 4 V ac, 20 Hz
Approvals CE Certified
Meter Type Digital
Measurement Range 0.01 → 1.2 A, 0.05 → 6 A, 1 → 120 V ac, 2.5 → 300 V ac, 4 → 600 V ac, 20 → 500 Hz
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
133,20
(excl. BTW)
161,17
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 133,20
Related Products
High count speed, numerous programming optionsSeparate inputs for ...
Description:
High count speed, numerous programming optionsSeparate inputs for position and frequency displayPosition display with various count modes, tachometer with time-base (gate time) or time-interval (process time) with an accuracy>0.1% (HRA time)Scaling factor 0.0001 to 99.9999Division factor 0.0001 to 99.9999Level of ...
Accepts 0-5V and 0-10V inputsLarge, easy-to-read LED displayHigh ...
Description:
Accepts 0-5V and 0-10V inputsLarge, easy-to-read LED displayHigh quality 20 turn span (gain) and zero (offset) adjustmentsDIP switch selectable range and decimal pointsBezel includedScrew terminal input connections.
Programmable display as permanently red or green, or ...
Description:
Programmable display as permanently red or green, or can change colour at a preset limit valueLarge Display: 5-digit 18mm height. Small Display: 1-digit 11mm height14 bit resolutionProgrammable High and Low alarmsFront panel sealing to IP66Dimensions: H48 x W96 x D100mm, ...
The process controller Codix 565 with totaliser function ...
Description:
The process controller Codix 565 with totaliser function displays V and mA analogue input signals in high resolution. In addition it can monitor and control 2 limit values.These fast displays set new standards when it comes to user friendliness. Their ...