Murata DMS-20LCD-4/20S-C , LCD Digital Panel Multi-Function Meter, 21.29mm x 33.93mm

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

9.4mm, 3.5 Digit Display

Very low loop drop: 1.8V typical (2V max)
Display range and decimal point selected by DIP switches
Non-interacting adjustment of gain (span) and offset (zero) via 20-turn potentiometers
2-wire screw terminal connection
Pin-for-pin compatible with the DMS-20PC-4/20S and has a bezel available separately which creates front panel seal to IP65

LCD 4 to 20mA Current Loop Powered Meters

Specificaties
Kenmerk Waarde
Display Type LCD
Cutout Height 21.29mm
Cutout Width 33.93mm
Depth 21.29mm
Number of Digits 3.5
Digit Height 9.4 mm
Minimum Temperature 0°C
Maximum Temperature +60°C
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
36 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
57,71
(excl. BTW)
69,83
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 57,71
Related Products
The ProSens multi function universal meter and controller ...
Description:
The ProSens multi function universal meter and controller has an intelligible display and is built in a closed-in tight housing. It can be used in many industrial applications as a standalone device or, thanks to its built-on RS-485 Port and ...
LCD compact digital/virtual analogue indicators with common dimensions ...
Description:
LCD compact digital/virtual analogue indicators with common dimensions requiring a single 5.5mm diameter mounting hole unless specified otherwise. A rubber seal is included providing splash proof protection for the units when fitted to the meter during installation. All have an ...
Single-channel digital indicators display measurements and monitor limit ...
Description:
Single-channel digital indicators display measurements and monitor limit values in various industrial applications. The indicators have a configurable analogue input that permits direct connection to various outputs with a standard signal. The sampling rate for the measurement input is 3 ...
Digital temperature display toolMicroprocessor controlSize: 76 x 36 ...
Description:
Digital temperature display toolMicroprocessor controlSize: 76 x 36 mm10 A changeover relay for limit value monitoringAdjustable switching hysteresisConfigurable alarm suppressionThree-digit backlit LCD with 13 mm digit height and special symbols for °C, °F, h, min, sCode-protected parameter levelProgrammable ...