Gefran 40T-72-4-00-RR-00-9 , On/Off Temperature Controller

  • RS-stocknr. 348-1777
  • Fabrikantnummer 40T-72-4-00-RR-00-9
  • Fabrikant Gefran
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: IT
Productomschrijving

Indicators with configurable threshold and 40T series universal input

Universal process indicators that are fully configurable with linear input signal range, thermoresistance, thermocouple or thermistor.
2 configurable alarm outputs and normally open contact (N/O).
Indication of the size measured by an adhesive label on the front face (for most common physical units).
Indication of over or under-scale measurement for linear inputs.
Identification of temperature probe cut-out or short circuit.
Version 48 x 96 with 4 / 20mA recopy output or with 4 / 20 mA sensor supply and recopy.
The model with 4 / 20 mA sensor power supply and recopy features a 3rd output relay.

Specificaties
Kenmerk Waarde
Minimum Temperature 0°C
Maximum Temperature +50°C
Series 40T
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
203,53
(excl. BTW)
246,27
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 203,53
Related Products
High count speed, numerous programming optionsSeparate inputs for ...
Description:
High count speed, numerous programming optionsSeparate inputs for position and frequency displayPosition display with various count modes, tachometer with time-base (gate time) or time-interval (process time) with an accuracy>0.1% (HRA time)Scaling factor 0.0001 to 99.9999Division factor 0.0001 to 99.9999Level of ...
Extra-wide, 5-digit LED display with 2 coloursProgram the ...
Description:
Extra-wide, 5-digit LED display with 2 coloursProgram the display as permanently red or green, or to change colour at a predefined valueFront panel seal rated as IP66Housed in casing that conforms to DIN standards, suitable for panel-mounting (48 x 96 ...
5-digit red, 38 mm highFulfils ISO 9000 in ...
Description:
5-digit red, 38 mm highFulfils ISO 9000 in productionIdeal for informing staff of process/performance variablesEasy to read from up to 25 mQuick configuration using front panel keys or PCPlug-in options: analogue output, 2 or 4 digital outputs, interface.
For measuring rate, ratios, differences and passing time ...
Description:
For measuring rate, ratios, differences and passing time applications. An encoder is used to provide a pulsed input, the meter then calculate based on this to provide the operation required. A power supply is an option available to power the ...