Carlo Gavazzi LDI35CFXD1XXXX , LED, Single Line PID Temperature Controller

  • RS-stocknr. 381-8062
  • Fabrikantnummer LDI35CFXD1XXXX
  • Fabrikant Carlo Gavazzi
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: IT
Productomschrijving

3//3.5 Digit and Dummy Zero Temperature Meter/Controller

RTD, thermocouple and resistance inputs
One set point with output relay

Carlo Gavazzi Series

This series of indicators and controllers features microprocessor based technology combined with a large, easy-to-read, seven segment, LED, 14.2mm display. Housed in 48mm(H) x 96mm(W) x 83mm(D) cases requiring a 45 x 92mm cut-out for panel mounting, they are CE marked to show compliance with relevant European Directives and have CSA approval as a minimum. All are programmable from the front key pad and have password protection unless otherwise stated.

Specificaties
Kenmerk Waarde
Display Type LED, Single Line
Minimum Temperature 0°C
Maximum Temperature +50°C
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
2 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
158,48
(excl. BTW)
191,76
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 158,48
Related Products
Programmable display as permanently red or green, or ...
Description:
Programmable display as permanently red or green, or can change colour at a preset limit valueLarge Display: 5-digit 18mm height. Small Display: 1-digit 11mm height14 bit resolutionProgrammable High and Low alarmsFront panel sealing to IP66Dimensions: H48 x W96 x D100mm, ...
The CAL 9900 series PID temperature controller is ...
Description:
The CAL 9900 series PID temperature controller is a microcontroller based unit for precise control with easy installation, suitable for support both heating and cooling applications. PID controllers offer proportional control over basic on/off controls allowing for a far more ...
The MAXVU temperature controller from CAL is designed ...
Description:
The MAXVU temperature controller from CAL is designed to offer essential temperature control in an easy-to-install device that is fast to program with improved display visibility.MAXVU provides an affordable solution for applications where primary temperature control functions such as heat ...
Omron’s E5CC range of temperature controllers are a ...
Description:
Omron’s E5CC range of temperature controllers are a premium PID based controller that support a wide variety of applications. Covering a comprehensive array of sensor inputs including a universal input, Thermocouple, PT as well as Analogue current/voltage inputs. The E5CC ...