Jumo 701540/811-02 , LCD Digital Panel Multi-Function Meter

  • RS-stocknr. 452-8782
  • Fabrikantnummer 701540/811-02
  • Fabrikant Jumo
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

di eco temperature indicator for PT100, PT1000 and KTY2X-6

Digital temperature display tool
Microprocessor control
Size: 76 x 36 mm
10 A changeover relay for limit value monitoring
Adjustable switching hysteresis
Configurable alarm suppression
Three-digit backlit LCD with 13 mm digit height and special symbols for °C, °F, h, min, s
Code-protected parameter level
Programmable network switch-on delay
Individual confirmation for individual control parameters
Simple assembly, panel-mounted
Electrical connection via screw terminals
Accessories: PT100 sensor (RS stock no. 454-2227), 6 x 50 mm protective tube, 2.5 m connection lead, silicone, -50 → +180 °C

Approvals

UL and CUL

Note

Power Supply is 230 V ac

Specificaties
Kenmerk Waarde
Properties Measured Current, Pressure, Temperature, Voltage
Display Type LCD
Number of Digits 3
Minimum Temperature 0°C
Maximum Temperature +55°C
Series di eco
13 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
17 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
104,99
(excl. BTW)
127,04
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 104,99
Related Products
The Lumel N24 series 4-digit LED digital panel ...
Description:
The Lumel N24 series 4-digit LED digital panel multi-function meter. It is designed to measure the temperature. Its service temperature ranges between -10°C and 55°C. Possible configuration of parameters is through the PD14 programmer and the free delivered LPConfig program. ...
Very low loop drop: 1.8V typical (2V max)Display ...
Description:
Very low loop drop: 1.8V typical (2V max)Display range and decimal point selected by DIP switchesNon-interacting adjustment of gain (span) and offset (zero) via 20-turn potentiometers2-wire screw terminal connectionPin-for-pin compatible with the DMS-20PC-4/20S and has a bezel available separately which ...
LCD compact digital/virtual analogue indicators with common dimensions ...
Description:
LCD compact digital/virtual analogue indicators with common dimensions requiring a single 5.5mm diameter mounting hole unless specified otherwise. A rubber seal is included providing splash proof protection for the units when fitted to the meter during installation. All have an ...
K3HB-V multi-function panel meters for load cell inputs. ...
Description:
K3HB-V multi-function panel meters for load cell inputs. Ideal for measuring factors such as load, torque, pressure and weight. With a simple to use menu structure for fast set-ups, these panel meters include pre-scaling which allows the display to show ...