MCP4251-104E/P, Digital Potentiometer 100kΩ 257-Position Linear 2-Channel Serial-SPI 14-Pin PDIP

  • RS-stocknr. 723-9731
  • Fabrikantnummer MCP4251-104E/P
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

MCP413x/415x/423x/425x Digital Potentiometers

The Microchip MCP413x, MCP415x, MCP423x and MCP425x range of devices are Digital Potentiometers that feature a SPI interface. On board is volatile RAM memory.

7-bit (129 steps) and 8-bit (257 steps) versions are available in various RAB resistance options from 5 kΩ to 100 kΩ. Further variants also give the choice between Rheostat and Potentiometer pinouts, Single and Dual Resistor Network options are also available.

Features

Zero Scale to Full-Scale Wiper Operation
Low Wiper Resistance: 75 Ω (typical)
Low Temperature Coefficient: Absolute (Rheostat) 50 ppm, Ratiometric (Potentiometer) 15 ppm (typical)
SPI Serial Interface
Resistor Network Terminal Disconnect Feature
Brown-Out Reset Protection: 1.5 V (typical)
Serial Interface Inactive Current: 2.5 μA (typical)
High-Voltage Tolerant Digital Inputs: Up to 12.5 V
Supports Split Rail Applications
Internal Weak Pull-Up on all Digital Inputs
Wide Operating Voltage: 1.8 V to 5.5 V
Wide Bandwidth (-3 dB) Operation: 2 MHz for 5.0 kΩ device (typical)

Model Variants

Potentiometer Wiper Configuration: MCP4131, MCP4151, MCP4231, MCP4251
Rheostat Wiper Configuration: MCP4132, MCP4152, MCP4232, MCP4252

Single Resistor Network: MCP4131, MCP4132, MCP4151, MCP4152
Dual Resistor Network: MCP4231, MCP4232, MCP4251, MCP4252

7-bit, 128 Resistors (129 steps): MCP4131, MCP4132, MCP4231, MCP4232
8-bit, 256 Resistors (257 steps): MCP4151, MCP4152, MCP4251, MCP4252

Digital Potentiometer - Microchip

Specificaties
Kenmerk Waarde
Control Interface Serial-SPI
Resistance Value 100kΩ
Number of Positions 257
Taper Type Linear
Memory Type Volatile
Number of Pots per Package 2
Mounting Type Through Hole
Package Type PDIP
Pin Count 14
Power Supply Type Single
Typical Single Supply Voltage 1.8 to 5.5 V
Dimensions 0.4 x 0.28 x 0.195in
Height 4.95mm
Maximum Operating Temperature +125 °C
Length 10.16mm
Minimum Operating Temperature -40 °C
Width 0.28in
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 23-11-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 2)
0,835
(excl. BTW)
1,01
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
2 - 8
€ 0,835
€ 1,67
10 - 22
€ 0,80
€ 1,60
24 - 98
€ 0,76
€ 1,52
100 +
€ 0,72
€ 1,44
*prijsindicatie
Verpakkingsopties
Related Products
The ADuCM360 is a 3.9kSPS, 24-bit data acquisition ...
Description:
The ADuCM360 is a 3.9kSPS, 24-bit data acquisition system that incorporates dual multichannel sigma-delta (Σ-Δ) analogue-to-digital converters (ADCs), an ARM Cortex-M3 core processor and memory on a single chip. The ADuCM361 has a single ADC. 2 x 24-bit multichannel Σ-Δ ...
16-Bit A/D Converters16-Bit D/A ConvertersProgrammable Input/Output Sample Rates75 ...
Description:
16-Bit A/D Converters16-Bit D/A ConvertersProgrammable Input/Output Sample Rates75 dB ADC SNR70 db DAC SNR64 ksps Maximum Sample Rate-90 db CrosstalkProgrammable Input/Output GainLow group Delay: 25 μs per ADC ch50 μs per DAC chFlexible Serial Port Allows Up to 4 Codecs ...
MCP3002 10-bit Analog-to-Digital Converter (ADC) combines high performance ...
Description:
MCP3002 10-bit Analog-to-Digital Converter (ADC) combines high performance and low power consumption in a small package, making it ideal for embedded control applications. The MCP3002 features a successive approximation register (SAR) architecture and an industry-standard SPI™ serial interface, allowing 10-bit ...
MCP4901 is a single channel, 8-bit DAC with ...
Description:
MCP4901 is a single channel, 8-bit DAC with an external voltage reference and SPI interface. It offers high accuracy and low power consumption and is available in various packages. 8-bit ResolutionSingle Channel Voltage Output2.7V to 5.5V OperationOperating Current 175μA (typ)External ...