energy meter DIRIS A30 12-48VDC

  • RS-stocknr. 184-9453
  • Fabrikantnummer 48250405
  • Fabrikant Socomec
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TN
Productomschrijving

DIRIS A-30 12-48 VDC auxiliary Supply, Multifunction Power Metering and Monitoring Device (PMD), Panel mount.

Specificaties
Kenmerk Waarde
Cutout Height 92mm
Cutout Width 92mm
Display Type Backlit LCD
Number of Phases 1, 3
Pulse Output Yes
Depth 95mm
Meter Accuracy Class 0.5 S (IEC 62053-22), Class 2 (IEC 62053-23), 0.1 (Frequency) %, 0.2 (Current) %, 0.2 (Voltage) %, 0.5 (Power Factor) %, 0.5 (Power) %
Minimum Temperature -10°C
Maximum Temperature +55°C
Maximum Measurement 11 (Current) kA, 65 (Frequency) Hz, 600 (Voltage Between Phase and Neutral) V ac, 1039 (Voltage Between Phases) V ac
Minimum Measurement 0 (Current) kA, 28 (Voltage Between Phase and Neutral) V ac, 45 (Frequency) Hz, 50 (Voltage Between Phases) V ac
Series DIRIS A30
Measurement Range 0 → 11 (Current) kA, 28 → 600 (Voltage Between Phase and Neutral) V ac, 45 → 65 (Frequency) Hz, 50 → 1039 (Voltage Between Phases) V ac
Meter Type Digital
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
933,33
(excl. BTW)
1.129,33
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 933,33
Related Products
The pointer type frequency meters housed in moulded ...
Description:
The pointer type frequency meters housed in moulded polycarbonate cases are suitable for the measurement of frequencies in the range of 45-65 Hz.For maximum accuracy, the essential measuring range is obtained by supressing the unwanted frequency span. These Frequency Power ...
LED’s Scan from “F” to “E” on power-up.(LED ...
Description:
LED’s Scan from “F” to “E” on power-up.(LED test mode)The meter will automatically display the current battery power when connected to the battery.When the battery voltage falls below the currently displayed LED bar for >155s, the highest LED segment switches ...
For measuring rate, ratios, differences and passing time ...
Description:
For measuring rate, ratios, differences and passing time applications. An encoder is used to provide a pulsed input, the meter then calculate based on this to provide the operation required. A power supply is an option available to power the ...
Multi function single phase MID B&D approved power ...
Description:
Multi function single phase MID B&D approved power meter that measures and displays electrical power quality parameters. The meter has been built to cover most applications (Single phase networks/built-in pulse and RS485 Modbus/import and export kWh). Thus replacing the need ...