0563 2750 Cooking Oil Tester, 1 Input Handheld

  • RS-stocknr. 891-9167
  • Fabrikantnummer 0563 2750
  • Fabrikant Testo
Datasheets
Wetgeving en compliance
Vrijgesteld
Land van herkomst: DE
Productomschrijving

Testo Digital Cooking Oil Tester

The Testo 270 digital cooking oil tester is a robust, easy-to-use measuring device with a temperature ranging from 40°C to 200°C. This instrument will enable you to observe critical TPM (Total Polar Material)/ TPC (Total Polar Compound) values while monitoring easy cooking oil. It allows you to change the oil just at the right time. This device prevents you from changing the cooking oil more frequently than is necessary, leading to cost savings. The digital cooking oil tester is easy to use and enables you to set the required TPM (Total Polar Material)/ TPC (Total Polar Compound) limit values in advance and protect them from being modified inadvertently with a PIN. The display will assist you during the measurement itself, as it will flash until a stable reading is reached. The display signalling function in traffic light colours (red, yellow and green) enables quick detection of the measurement result range. Naturally, the accurate reading in %TPM can also be read off on the display. This tester will enable you to work more reliably, intuitively and efficiently as it will help you with high-quality frying processes.
Supplied with:
Cooking oil tester, case, reference oil, short instructions, full instruction manual and training card, as well as calibration protocol and batteries.

Features and Benefits

Accuracy is ±2 %TPM (+40 to +190 °C) ±1.5 °C
Resolution is 0.5%TPM (104 to 374°F) (+40 to +190 °C), 0.1°F / °C
Capacitive oil sensor
Clear, visual alarm indication via LCD, 2-line highly-visible alarm backlight in traffic light colours
Ergonomic design to easily take measurements in hot oil (user is protected from the heat of the deep fat fryer)
Washable case for hygienically stowing away at the application site
Hold and auto-hold function
Calibration and adjustment can be carried out by the user
Battery type is 2 x AAA batteries
Housing material is ABS / ABS-PC fibreglass 10%

Applications

Catering
Commercial kitchen
Food inspection
Food processing

Certifications

IP65 rated
NSF (National Sanitation Foundation) certified

Specificaties
Kenmerk Waarde
Absolute Maximum Temperature Measurement +200°C
Thermometer Type Handheld
Application Kitchen Appliance
Best Accuracy ±1.5 °C
Number of Temperature Inputs 1
Resolution 0.1 °C
Length 50mm
Width 170mm
Height 300mm
Dimensions 50 x 170 x 300mm
Weight 255g
Temperature Scale Centigrade
Battery Type AAA
Model Number p Testo 270
10 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
380,00
(excl. BTW)
459,80
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 380,00
Related Products
This intrinsically safe thermometer is approved for use ...
Description:
This intrinsically safe thermometer is approved for use in potentially explosive atmospheres (group IIC gas types and T4) in Zone 1 hazardous areas. Basic temperature monitoring features including K type thermocouple selection and the choice of two resolution scalingsDesigned for ...
BacklightDisplay holdOptional auto power off after 12 minutesLow ...
Description:
BacklightDisplay holdOptional auto power off after 12 minutesLow battery indicationSet up retention (when switched on the last settings used are displayed)K-type thermocouple based industrial thermometersDesigned to suit a wide variety of process, industrial and HVAC applicationsThese instruments can be calibrated ...
Multiple thermocouple based industrial thermometersSingle channel inputDesigned to ...
Description:
Multiple thermocouple based industrial thermometersSingle channel inputDesigned to suit a wide variety of process, industrial and HVAC applications with the added flexibility of a choice of thermocouplesSelectable type K,T, J,N, R, S thermocoupleBacklightDisplay holdOptional auto power off after 12 minutesLow ...
LCD compact digital/virtual analogue indicators with common dimensions ...
Description:
LCD compact digital/virtual analogue indicators with common dimensions requiring a single 5.5mm diameter mounting hole unless specified otherwise. A rubber seal is included providing splash proof protection for the units when fitted to the meter during installation. All have an ...