XL-2000-01 Enclosure, 95.5 x 80 x 135mm

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: SI
Productomschrijving

RS PRO XL-2000-01 Series Motor Protection Switch Enclosures, IP41 & IP55

Introducing the XL-2000-01 series of DIN rail enclosures from our trusted and reliable own brand RS PRO, a selection of durable, airtight enclosures suitable for protecting electrical parts and components. The enclosures are quick and easy to install and are ideal for mounting to a DIN rail in a variety of environments. The XL-200-01 series is available in either IP41 protection (stock no. 331-3725) or IP55 (stock no. 331-3731) , depending on the type of application required and is suitable for an M25 cable entry thread. The XL-2000-01 series has been designed with motor protection switches in mind, offering a suitable enclosure that can be mounted to a DIN rail.

Features and Benefits

• Available in either IP41 or IP55 protection
• Durable, airtight and chemical resistant casing to protect electrical parts and components
• Ideal for the installation of motor protection switches
• White in colour suitable for a variety of environments
• Quick and easy to install

Common Applications

These highly durable enclosures are suitable for mounting to a DIN rail in a wide range of applications such as:

• Power breakers
• HVAC
• Network interfaces
• IoT devices
• Condition monitors
• Bus systems

What is the IP rating?

The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. The XL-2000-01 series offers two enclosures with different IP ratings dependant on the type of application.

331-3725 (IP41 protection), offers protection from small tools, wires and condensation
331-3731 (IP55 protection), offers protection from limited dust ingress and low pressure water jets

What is a DIN rail enclosure?

DIN rail instrument enclosures provide perfect protection from dust and moisture of internal electrical parts and components that are required to be mounted to a DIN rail. This form of enclosure is ideal for when space is limited or restricted. An enclosure mounted to a DIN rail allows PCB (printed circuit boards) and other standard electrical components to be safely installed and protected at all times, reducing the risk of damage and deterioration. Enclosures for DIN rails are also compatible with a range of accessories such as panel blanking, hooks and screws for easy installation.

How to mount a DIN rail enclosure

An enclosure designed for a DIN rail can easily be mounted to the rail via a screw or hook, providing quick installation.

Specificaties
Kenmerk Waarde
Dimensions 95.5 x 80 x 135mm
Length 95.5mm
Width 80mm
Height 135mm
Maximum Terminals 1
Colour White
Series XL-2000-01
Special Features M25 Cable Entry Thread
Standards Met RoHS
Enclosure Rating IP41, IP55
52 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
64 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
8,61
(excl. BTW)
10,42
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 8,61
5 - 9
€ 8,26
10 +
€ 7,98
Related Products
This enclosure is 25 mm wide and has ...
Description:
This enclosure is 25 mm wide and has a Miniconnec plug-in connector strip designed to take a female connector with 5.08 mm pitch (order separately)Miniconnec connectors are not designed to be handled when liveEach connection point can be connected to ...
This empty enclosure to be fitted onto guides ...
Description:
This empty enclosure to be fitted onto guides is designed to take EurocardsThe PCB is fixed directly to the central part of the enclosure, which can be closed with the two lateral elementsThis empty enclosure consists of a device that ...
New standard for electronic housing for rail mountingRail ...
Description:
New standard for electronic housing for rail mountingRail bus connector optionalSimple module exchange without interrupting the contact chainElectronic housing consists of housing shells on left and right, panel, transparent cover, metal mounting foot and spring.
A DIN rail vertical box from CamdenBoss made ...
Description:
A DIN rail vertical box from CamdenBoss made from green flame retardant polycarbonate and available in two sizes, 22.5mm or 45mm. These enclosures have 2x2.5mm2 solid or standard cable entries and provide terminal protection of IP20. Designed for 5mm pitch ...