4M XTS Compact DIN Rail Enclosure, ABS DIN Rail

  • RS-stocknr. 918-8926
  • Fabrikantnummer 35.0407000.BL
  • Fabrikant Italtronic
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IT
Productomschrijving

Modulbox XTS Compact

The Modulbox Compact XTS is a DIN Rail mountable enclosure made from a self-extinguishing PC/ABS blend. This new addition to the Italtronic range has its height reduced to approximately 32 mm. That apart, it is similar to the Modulbox XTS enclosure and can be equipped with the same electronic boards. With simple spacers or pins, another PCB can be fitted to the top of the enclosure.
The Modulbox Compact XTS is available in 24 enclosure kits divided into 3 versions.

Features and Benefits

Version A allows terminal blocks/connectors to be mounted on either side of the enclosure
Version B has one open side for terminal blocks/connectors and one high shoulder to increase internal volume for components
Version C has two high shoulders offering increased volume for components
All 3 have a top panel produced as part of the mould (non-removable)

Applications

The Modulbox XTS Compact is designed for use in various electronic and electrical applications. It can be hooked on the GUIDE EN 60715 (made in conformity with standard DIN 38880) or can be fixed to the wall.

Note

Versions A and B utilise the terminal covers used with the standard Modulbox XTS.

Supplied with

Base, cover and DIN Rail hook.

Specificaties
Kenmerk Waarde
Body Material ABS
Enclosure Type DIN Rail
Length 90mm
Height 32.2mm
Colour Grey
Series 4M XTS Compact
Standards Met EN 60715
Terminal Type PCB
4 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
6,49
(excl. BTW)
7,85
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 6,49
Related Products
This empty enclosure to be fitted onto guides ...
Description:
This empty enclosure to be fitted onto guides is designed to take EurocardsThe PCB is fixed directly to the central part of the enclosure, which can be closed with the two lateral elementsThis empty enclosure consists of a device that ...
Clicks onto EN railsFully equipped with 3 screw ...
Description:
Clicks onto EN railsFully equipped with 3 screw or 6 flat pin connectors on each sideFor one printed circuit board.
New standard for electronic housing for rail mountingRail ...
Description:
New standard for electronic housing for rail mountingRail bus connector optionalSimple module exchange without interrupting the contact chainElectronic housing consists of housing shells on left and right, panel, transparent cover, metal mounting foot and spring.
The CNMB series of standard height DIN rail ...
Description:
The CNMB series of standard height DIN rail module boxes from CamdenBoss are an ideal enclosure for a wide range of electrical and electronic projects. Moulded in light grey flame retardant polycarbonate the enclosure has a snap fit modular design ...